Feasibility study of a method for tuning wave energy converters

Wilson Guachamin-Acero,Ricardo Alvarez,Jordany Segovia,Marcelo Salguero,Jorge Bravo,Rubén Paredes,Mijail Arias-Hidalgo,Rafael Soria,Jesús Portilla-Yandún

DOI: https://doi.org/10.1016/j.seta.2024.103702

IF: 7.632

2024-02-22

Sustainable Energy Technologies and Assessments

Abstract:A Wave Energy Converter (WEC) cannot operate efficiently if left alone floating to the mercy of the random sea surface. For a WEC to be efficient, its natural frequency should be close to the peak frequency of the local dominant waves. This paper introduces a method for tuning any natural frequency of a WEC to the peak frequency of a wave spectrum and converting dynamic responses into mechanical power. An innovative lightweight and dual-drag force subsea structure with a huge amount of entrapped seawater can be attached to any vessel using cables. This structure increases the roll mass moment of inertia of a medium size barge, and the mass of a small heaving floater, reducing their natural frequencies. The tension in the cables is converted into mechanical power. The study focuses on the Galápagos Islands, where swells with a typical 13 s peak period and significant wave height between 1 to 3 m dominate the wave climate. For the dynamic systems based on roll and heave responses, annual averages of mechanical power are 178 and 73 kW with efficiencies of 49 and 67% respectively. The method developed in this paper can improve the efficiency of existing and novel WECs.

energy & fuels,green & sustainable science & technology