Sustainable cotton dyeing with reactive dyes in the recycled dyeing wastewater

Dawu Shu,Shaolei Cao,Yan Zhang,Wanxin Li,Bo Han,Fangfang An,Ruining Liu
DOI: https://doi.org/10.1108/prt-09-2023-0082
2024-02-03
Pigment & Resin Technology
Abstract:Purpose This paper aims to find a suitable solution to degrade the C.I. Reactive Red 24 (RR24) dyeing wastewater by using sodium persulphate to recycle water and inorganic salts. Design/methodology/approach The effects of temperature, the concentration of inorganic salts and Na 2 CO 3 and the initial pH value on the degradation of RR24 were studied. Furthermore, the relationship between free radicals and RR24 degradation effect was investigated. Microscopic routes and mechanisms of dye degradation were further confirmed by testing the degradation karyoplasmic ratio of the product. The feasibility of the one-bath cyclic dyeing in the recycled dyeing wastewater was confirmed through the properties of dye utilization and color parameters. Findings The appropriate conditions were 0.3 g/L of sodium persulphate and treatment at 95°C for 30 min, which resulted in a decolorization rate of 98.4% for the dyeing wastewater. Acidic conditions are conducive to rapid degradation of dyes, while ·OH or SO 4 − · have a destructive effect on dyes under alkaline conditions. In the early stage of degradation, ·OH played a major role in the degradation of dyes. For sustainable cyclic dyeing of RR24, inorganic salts were reused in this dyeing process and dye uptake increased with the times of cycles. After the fixation, some Na 2 CO 3 may be converted to other salts, thereby increasing the dye uptake in subsequent cyclic staining. However, it has little impact on the dye exhaustion rate and color parameters of dyed fabrics. Originality/value The recommended technology not only reduces the quantity of dyeing wastewater but also enables the recycling of inorganic salts and water, which meets the requirements of sustainable development and clean production.
engineering, chemical,materials science, coatings & films,chemistry, applied
What problem does this paper attempt to address?