Exploring the influence of contributing factors and impact degree on bus emissions in real-world conditions

Chao Wang,Zhirui Ye,Hui Bi

DOI: https://doi.org/10.1007/s11356-021-12945-3

IF: 5.8

2021-03-08

Environmental Science and Pollution Research

Abstract:Buses in urban have environmental problems because they are mostly having higher emission factors and pollution levels. This study analyzed the contributing factors on bus emissions including NOX, CO, HC, and CO2 and further evaluated the impact degree of these factors. A back-propagation neural network (BPNN) was applied, and the results showed that the composition of pollutant emissions for different fuel types was various. BPNN can be utilized to solve the multifactor, uncertainty, and nonlinearity problems without making any prior presumptions about the data distribution. Among them, diesel buses under EURO-IV and EURO-V emission standards were more likely to produce higher emissions of CO and NOX. By contrast, the emission level of CO and NOX for compressed natural gas bus was lower, but the emission level of CO2 and HC was heavier. In this study, nine variables, namely, speed, acceleration, passenger load, past speed, past acceleration, acceleration time, delay time, stops, and location were selected to investigate their effects on bus emissions. The results showed that factors delay time, location, and stops had the strongest impacts on bus emissions. By contrast, bus emissions were not sensitive to past speed and passenger load. In addition, to fully understand the influence of contributing factors, the impact degree of all these factors on bus emissions was summarized in this study.

environmental sciences

What problem does this paper attempt to address?

The main problem this paper attempts to address is the analysis of the influencing factors of urban bus emissions and their impact levels. Specifically, the study focuses on the emission characteristics of buses with different fuel types (such as diesel, compressed natural gas, and gas-electric hybrid) under actual operating conditions, and evaluates the impact of various factors on bus emissions using a Back Propagation Neural Network (BPNN) model. These factors include speed, acceleration, passenger load, past speed, past acceleration, acceleration time, delay time, number of stops, and location. The study aims to provide scientific basis and policy recommendations for reducing bus emissions. The main contributions of the paper are: 1. **Proposed a quantitative analysis method**: Using the BPNN model to analyze the factors affecting bus emissions and assess the impact levels of these factors. 2. **Detailed analysis of the impact of different fuel types**: The study found that diesel buses meeting EURO-IV and EURO-V emission standards are more likely to produce higher CO and NOx emissions, while compressed natural gas buses have lower CO and NOx emissions but higher CO2 and HC emissions. Gas-electric hybrid buses showed the lowest emission values. 3. **Identified key influencing factors**: The study indicates that delay time, location, and number of stops have the greatest impact on bus emissions, while past speed and passenger load have a smaller impact on emissions. These research findings can provide references for urban traffic management departments to formulate policies to reduce bus emissions.

Exploring the influence of contributing factors and impact degree on bus emissions in real-world conditions

Estimation of bus emission models for different fuel types of buses under real conditions

Unraveling nonlinear and interaction effects of various determinants on bus gaseous emissions

Estimating gaseous pollutants from bus emissions: A hybrid model based on GRU and XGBoost

Understanding and estimating the carbon dioxide emissions for urban buses at different road locations: A comparison between new-energy buses and conventional diesel buses

Assessing on-road emissions from urban buses in different traffic congestion scenarios by integrating real-world driving, traffic, and emissions data

Real-world operation conditions and on-road emissions of Beijing diesel buses measured by using portable emission measurement system and electric low-pressure impactor

Roadside Assessment of a Modern City Bus Fleet: Gaseous and Particle Emissions

Preliminary analysis of on-road emission characteristics of diesel buses

Real-world Fuel Consumption and CO2 Emissions of Urban Public Buses in Beijing

Using a Chassis Dynamometer to Determine the Influencing Factors for the Emissions of Euro VI Vehicles

Study on the Emission Characteristics of Typical City Buses under Actual Road Conditions

Evaluating real-world CO2 and NOX emissions for public transit buses using a remote wireless on-board diagnostic (OBD) approach.

Investigation on vehicular pollution level in various transport micro-environments in Beijing

Delay correction model for estimating bus emissions at signalized intersections based on vehicle specific power distributions

On-road Emission Factor Distributions of Individual Diesel Vehicles in and Around Beijing, China

Examining the relationship between the built environment and carbon emissions from operating vehicles: enlightenment from nonlinear models

Investigation of real-world emissions of China III and China IV buses in a high-altitude city: A case study of Lhasa

Experimental Study and Characterization of Diesel Pm Pollution of Urban Bus

Spatiotemporal Analysis of CO2 Emissions and Emission Reduction Potential of Beijing Buses Using Smart Card Data

NOx emissions from Euro IV busses with SCR systems associated with urban, suburban and freeway driving patterns