Abstract:The current work presents and discusses the design and performance qualities of braided electronic yarns for woven textiles to produce red light-intensity effects. The design process involves a simple encapsulation process with adhesive tape and a heat-shrinkable tube to secure stainless-steel conductive threads (SS-CTs) to the solder pads of light-emitting diodes. These are arranged in a series against two SS-CTs to provide single positive and negative terminals at both ends. Findings from the infrared images show that the heat distribution and dissipation of the stainless-steel conductive threads are insignificant in affecting the wear comfort of the electronic textiles on the human body. The washing test shows the robust nature of the braided electronic yarns even after 20 cycles of being subjected to high agitation and mechanical stress. A proof of concept illustrates the effectiveness of the study results, which calls on further research work to enhance the durability and flexibility of the braided electronic yarns and electronic textiles to ensure a higher level of wear comfort. These braided electronic yarns would find end applications for nighttime visibility of pedestrians, a situation that would improve the recognition of drivers for reduced collision. Electronic textiles otherwise known as e-textiles have been the subject of scholarly attention in recent years due to their performance properties and wide areas of application for entertainment, monitoring, and safety purposes. The use of appropriate electronic yarns (e-yarns) plays a key role in connectivity and provides the necessary feedback when applied to a textile material. E-yarns are now replacing a few modern electronic textiles (e-textiles) that use rigid copper wires commonly applied in electronic circuits for e-textiles and improve the wear comfort of the garment. The integration of light-emitting diodes (LEDs) into conductive threads to form electronic yarns for textile material can be applied not only for entertainment purposes but also as a safety feature for pedestrians. The use of appropriate components is necessary to ensure and maintain the textile quality and properties for effective wearability. Herein, an e-yarn fabricated with stainless-steel conductive threads and LEDs for e-textiles is presented. As part of ongoing research work to develop smart interactive clothing to increase the nighttime visibility of pedestrians, this work discusses the design and performance qualities of braided e-yarns for woven textiles. The success of these low-cost, flexible, and strong (high wash durability) braided e-yarns facilitates their integration into woven fabrics for smart clothing to enhance the visibility and therefore safety of pedestrians.

Electrical and electrothermal characterization of silver-coated Vectran and Amberstrand yarns for wearable heating

Study the Electrical Properties of Surface Mount Device Integrated Silver Coated Vectran Yarn

Multifunctional green synthesized silver nanoparticle and polypyrrole-based e-textile for wearable thermoregulation applications

Fabrication of cotton/polyethylene glycol/stainless steel wire friction spun composite yarn and its application in electrothermal phase change textile

Flexible and strain conductive cotton yarn enabled by low-temperature sintering of silver paste with multifunctional sensing capability in human motion detection and wearable applications

Machine-Washable Conductive Silk Yarns with a Composite Coating of Ag Nanowires and PEDOT:PSS

Functional performance of low-cost electronic yarn for E-textiles

Highly Stretchable and Durable Electrospinning Polyurethane Nanofiber Composite Yarn for Electronic Devices

Recent progress on general wearable electrical heating textiles enabled by functional fibers

Synthesis of conductive yarn to develop wearable electronic device

High-performance electrothermal fabrics enabled by lignin-derived carbon nanotube yarns

Impact of hot air gun soldering process parameters on the electromechanical properties of electronic yarn

Development of Stainless Steel Yarn with Embedded Surface Mounted Light Emitting Diodes

Temperature-controlled wearable heater of durably conductive cotton fabric prepared by composite coatings of silver/MXene and polydimethylsiloxane

Enhancing Thermoelectrical Properties of Silver-Nanowire-Embedded Heatable Textiles via Sputter-Mediated Nanowire Structural Modulation

Weft‐Knitted Fabric for a Highly Stretchable and Low‐Voltage Wearable Heater

Facile and scalable fabrication of stretchable flame-resistant yarn for temperature monitoring and strain sensing

Flexible Wet-Spun PEDOT:PSS Microfibers Integrating Thermal-Sensing and Joule Heating Functions for Smart Textiles

The Interconnecting Process and Sensing Performance of Stretchable Hybrid Electronic Yarn for Body Temperature Monitoring

Electrically-driven textiles using hierarchical aramid fiber

Heating filament with Self-Regulation Temperature by Coating a Metallic Yarn with a Conductive Polymer Composite