Abstract:Previous secondary optical designs, however, have approximated the LED light distribution curve as a Lambertian distribution which is unable to suit all custom sources. In this paper, a freeform surface lens is utilized to redistribute the light rays emitted from a LED device with a random light distribution curve in order to effect a prescribed illumination distribution on the target area. A mapping relationship is also established between the spatial light intensity distribution of a light source and the rectangular uniform illumination used for road-going cases. A set of first-order partial differential equations is deduced according to Snell’s Law and the Law of Energy Conservation. A numerical solution is obtained through MATLAB software, and freeform surface data of the secondary optical lens is recorded to aid in modeling the freeform surface lens. Simultaneously, an analysis and comparison of different differential algorithm and mapping methods is carried out in order to solve the differential equations and designate the most superior mapping relationship. With the help of 3D software, a 3D model of the freeform surface lens is established, and Light Tools software is employed to simulate the effects of illumination. In this model, the light distribution curve of the LED source is described as an eighth-order polynomial. According to the simulated results, a 10m height, 40m×40m road uniform illumination is realized by the secondary optical design. The energy efficiency and uniformity of this illumination is 99.7% and 91.52% respectively. This method of secondary optical design is easy to operate and can be applied to any other lighting systems with random LED sources.

Design of Primary Optics for LED Chip Array in Road Lighting Application

Secondary light distribution design for LED street light

Optical Design in Packaging and Illuminating System for High Power Light-Emitting Diodes for Projection System

Secondary Optical Design for LED Illumination Using Freeform Lens

Freeform Led Lens For Uniform Illumination

Optimization design of irradiance array for LED uniform rectangular illumination.

53.2: An Optimization Design Method of LED Freeform Lens for Uniform Circular Illumination

Optical design of a road lighting luminaire using a chip-on-board LED array

Optimized Design of LED Freeform Lens for Uniform Circular Illumination

Freeform Lens Design for LED Illmination

A Typical Light Distribution Design In The High Efficient Led Street Lamp

A Novel Optimization Strategy For Led Street Lamp Designing

Freeform Surface Lens for LED Uniform Illumination.

Design of Led Freeform Optical System for Road Lighting with High Luminance/Illuminance Ratio

Optimal Design of Optical System for LED Road Lighting with High Illuminance and Luminance Uniformity.

Design of Freeform Lens for Optimazation of Luminous Intensity Distribution Based on Luminance Coefficient

Design of Freeform Surface Lens for Led of Random Light Distribution in Road Lighting

Optical Design of a Street Lamp Based on Dual-Module Chip-on-board LED Arrays

Optical Efficiency Analysis of LED Road Lighting Luminaive

P‐63: Optimization Design of Irradiance Array for the Direct‐lit LED Backlight

Optical Design of Adjustable Light Emitting Diode for Different Lighting Requirements