Abstract:A flat optical frequency comb (OFC) is generated by using a monolithic integrated electro-optic intensity and phase modulator fabricated on lithium niobite on insulator (LNOI) platform. The LNOI-based modulation chip consists of a push–pull Mach–Zehnder modulator (MZM) and a U-shaped phase modulator (PM) connected by a curved optical waveguide. Microwave and optical packaging are implemented for the modulation chip, where the input and output pigtails of the packaged modulation device are polarization-maintaining fibers, with a core diameter of 6.5 μm. The packaged LNOI-based modulation device is featured by a fiber-to-fiber insertion loss as low as 6.97 dB. The half-wave voltages of the MZM and the PM are measured to be 3.6 V and 3.4 V at 5 GHz, respectively. By using the modulation device, an OFC with a tooth spacing of 5 GHz is generated, and the 13 comb teeth in the generated OFC are with a power flatness of 2.4 dB. The measured results of this device indicate that the tooth spacing of the generated OFC can be extended to tens of gigahertz by using a microwave source with a higher output frequency. In addition, the number of the comb teeth can be enhanced beyond 20 by increasing the power of the radio-frequency signal applied to the PM or by further reducing the half-wave voltage of the PM.

Improvement of Flatness of Optical Frequency Comb Based on Nonlinear Effect of Intensity Modulator

Generation of Flat Optical-Frequency Comb Using Cascaded Intensity and Phase Modulators

Generation of a 25-Line Flattened Optical Frequency Comb and Its Coherent Beating Properties.

Frequency chirp linearization for ultraflat optical frequency comb generation based on group velocity dispersion.

Experimental demonstration of a flat optical frequency comb generation based on cascaded directly modulated distributed feedback laser and polarization modulator

Generation of Flat Optical Frequency Comb Using Cascaded PMs With Combined Harmonics

Flat-Top Optical Frequency Comb Generation Based on Optical Fiber-Loop Modulation with External Injection

Generation of Broadband Optical Frequency Comb with Rectangular Envelope Using Cascaded Intensity and Dual-Parallel Modulators

Flat Optical Frequency Comb Generation Based on Monolithic Integrated LNOI Intensity and Phase Modulator

Ultra-flat Optical Frequency Comb Generator Using a Single-Driven Dual-Parallel Mach-Zehnder Modulator.

Optical Frequency Comb Generation via Cascaded Intensity and Phase Photonic Crystal Modulators

Optical frequency comb generation based on spectral broadening of a phase locked dual-wavelength microcavity laser

Flat Self-Oscillating Parametric Optical Frequency Comb Based on a Dual-Mode Microcavity Laser

Flattened comb generation using only phase modulators driven by fundamental frequency sinusoidal sources with small frequency offset.

Photonic Crystal Cavity-Based Intensity Modulation for Integrated Optical Frequency Comb Generation

Optical Frequency Comb Based on Cascading Intensity Modulation for Optical Arbitrary Waveform Generation

High power flatness and wide spectrum range microwave frequency combs generation based on an actively mode-locked optoelectronic oscillator with intensity feed-forward path

Robust Optical Frequency Comb Generation by Using a Three-Stage Optical Nonlinear Dynamic

Modulating Photonic Crystal Structures to Generate Optical Frequency Combs

Coherent Comb Generation With Continuous Sweep of Repetition Rate Over One-Octave

An Ultra-Flat Optical Frequency Comb Generator Based on Frequency Chirp Linearization