Abstract:Understanding the flow fields at the micro-scale is key to developing methods of successfully mixing fluids for micro-scale applications. This paper investigates flow characteristics and mixing efficiency of three different geometries in micro-channels. The geometries of these channels were rectangular with a dimension of; 300μm wide, 100μm deep and 50mm long. In first channel there was no obstacle and in the second channel there were rectangular blocks of dimension 300μm long and 150μm wide are placed in the flow fields with every 300μm distance attaching along the channel wall. In the third geometry, there were 100μm wide fins with 150° angle which were placed at a distance of 500μm apart from each other attached with the wall along the 50mm channel. Fluent software of Computational Fluid Dynamics (CFD) was used to investigate the flow characteristics within these microfluidic model for three different geometries. A species 2D model was created for three geometries and simulations were run in order to investigate the mixing behaviour of two different fluid with viscosity of water (1mPas). Models were only built to investigate the effect of geometry, therefore only one fluid with similar viscosity was used in these models. Velocity vector plots were used in the CFD analysis to visualise the fluid flow path. Mass fractions of fluid were used to analyse the mixing efficiency. Two different colours for water were used to simulate the effect of two different fluids. The results showed that the mixing behaviour strongly depended on the channel geometry when other parameters such as fluid inlet velocity, viscosity and pressure of fluids were kept constant. In two geometries lateral pressure and swirling vortexes were developed which provided better mixing results. Creation of swirling vortexes increased diffusion gradients which enhanced diffusive mixing.

Effects of Geometry on the Liquid Flow in Microchannel

Effects of Geometry on Liquid Flow and Heat Transfer in Microchannels

WATER-OIL FLOW IN SQUARE MICROCHANNELS WITH A CROSSED JUNCTION

EFFECTS OF INLET ARRANGEMENTS ON LIQUID-LIQUID FLOW PATTERNS IN CROSS-JUNCTION SQUARE MICROCHANNELS

Effects of geometry on simulation of two-phase flow in microchannel with density and viscosity contrast

Size effect on single-phase channel flow and heat transfer at microscale

Simulation Studies on Fluid Density Distribution of Micro-Flows in A Nano-Channel

Numerical Analysis of Flow and Heat Transfer Characteristics in Micro-channels

Experimental and numerical studies on the gas-liquid distributions in microchannels

Effects of geometry of micro-channel on the methane/air combustion

Effect of micro-channel geometry on fluid flow and mixing

Geometry Effect on the Mass Transfer of Slug Flow in the Microchannels with Periodic Expansion Units

Influence of the Unit Y-shaped Microchannel Geometry on the Capillary Flow

Size effect on microscale single-phase flow and heat transfer

Effects of Different Geometric Structures on Fluid Flow and Heat Transfer Performance in Microchannel Heat Sinks

Roughness Effect of Different Geometries on Micro Gas Flows by Lattice Boltzmann Simulation

Research on Flow in Microchannels with Lotus Effect Coating by Molecular Dynamics Simulation

Experimental study on influence of microscale effects on liquid flow characteristic in microtubes

Flow characteristics in microchannel with different cross-section

Effects of Geometry Factors on Microvortices Evolution in Confined Square Microcavities

Morphology Effect of Surface Structures on Microchannel Flow Using Lattice Boltzmann Method