Abstract:There has been much interest recently in the area of engineered materials with unusual electromagnetic properties known as metamaterials. Since the first DNG metamaterial, which consists of metallic split ring resonators (SRRs) and wires, was reported [1], numerous investigations have been conducted both theoretically as well as experimentally in order to make use of the metamaterial to improve the performance of the RF devices, and reduce their size [2, 3]. Particularly, an one-dimensional (1D) miniaturized cavity resonator (MCR) consisting of DNG and DPS bilayer was proposed in [4]. Very recently, the idea of the 1D MCR in [4] was realized in a rectangular cavity, which was filled partially with DNG consisting of Ω-alike inclusions and partially with air [5]. However, the width of the MCR in [5] is still not small enough (it is 22 mm) although the length is small (only 13 mm) at its resonance frequency of 9.6 GHz, due to the fact that the width must be equivalent to the integer multiples of the half of the resonance wavelength. In this presentation, we propose a further miniaturization approach for the MCR through extending the analysis to a three-dimensional (3D) case. We explore the resonance equation solutions of the general case of a 3D rectangular cavity resonator filled with anisotropic metamaterials bilayer. It is shown that both the resonant modes in such a resonant cavity and the transmission characteristics of its corresponding waveguide are closely dependent on the spatial dispersion relation of the filling anisotropic metamaterials. Based on the concept mentioned above, a novel miniaturized rectangular cavity resonator (MRCR) is designed by means of CST’s MW STUDIO simulation tools. Compared with the MCR in [5], the MRCR’s width and length normalized to the resonance wavelength are shorten simultaneously.

Expanding the Bandwidth of Planar MNG Materials with Co-Directional Split-Ring Resonators

Design of a Broadband Μ-Negative Planar Material with Low Frequency Dispersion

Metamaterials with Broadband Double Negative Characteristics Based on Mie Resonance

Investigation of negative index properties of planar metamaterials based on split-ring pairs

Extending the bandwidth of electric ring resonator metamaterial absorber

Multiple Frequency Bands of Square Split Resonant Rings and Metal Wire Metamaterial

Negative index of reflection in planar metamaterial composed of single split-ring resonators

Study on the Resonance Properties of Combinations of Different Split Ring Resonator Cells

Negative Index of Refraction in Metallic Metamaterial Comprising Split-Ring Resonators.

A Double-Negative Waveguide Metacomposite Enabled by Ferromagnetic Microwires

Design of Planar LHM with Broad Bandwidth and Miniaturized Cell

Isotropic Negative Permeability Metamaterials and Left-Handed Metamaterials Based on Miniature Structure

Thermal expansion regulation and bandgap analysis of a novel dual-constituent negative Poisson’s ratio lattice metamaterial

A Dual-Band Epsilon-Negative Material Design Using Folded-Wire Structures

Development and evaluation of wideband negative response in ultra-thin polygon metamaterial

Metamaterials Cavity Resonator with Simultaneously Shorten Length and Width

Magnetically Tunable Negative Permeability Metamaterial Composed by Split Ring Resonators and Ferrite Rods

Experimental Validation of Negative Refraction of Metamaterial Composed of Single Side Paired S-ring Resonators

Study on New Period Structures of Left-Handed Material Based on Rectangular Resonators and Metal Wires

Design of Metamaterial Using Split-Ring Resonators for Efficiency Enhancement of Wireless Power Transmission

Tunable Triple-Band Negative Permeability Metamaterial Consisting of Single-Loop Resonators and Ferrite