Abstract:In this work, with the aim of improving the nonlinearity threshold in tandem-pumped fiber amplifiers for higher output power, theoretical and experimental work was carried out to enhance the pump absorption and thereby decrease the required length of ytterbium-doped fiber by employing shorter-wavelength fiber lasers as the pump sources. Systematical simulations were first carried out to optimize the cavity parameters of a short-wavelength fiber oscillator at 1007 nm, and subsequently, the performance of the 1007 nm fiber laser in tandem pumping was simulated and compared with that of the 1018 nm fiber laser pumped results. Considerable absorption increment and efficiency improvement could be realized in the 1007 nm fiber laser pumped fiber amplifier relative to the 1018 nm fiber laser pumped one. Furthermore, according to the simulation results, a fiber laser operating at 1007.7 nm with the output power of ∼170 W and a slope efficiency of ∼72.90% was experimentally demonstrated. By applying this fiber laser in tandem pumping a 1080 nm fiber amplifier with different gain fiber lengths, improved performance was acquired in comparison with the 1018.6 nm tandem pumping scheme, the experimental results of which were coherent with the simulation results. This work could provide an effective approach for improving the nonlinearity threshold of tandem-pumped fiber amplifiers and paving the way for higher output power.

High Power Tandem Pumping Fibre Amplifier

High Efficiency Tandem-Pumped Fiber Amplifier

Experimental Study on Tandem Pumped Fiber Amplifier

High Power and Low Quantum-Defect Yb-doped Fiber Amplifier Based on Tandem Pumping

High-power 1018 nm ytterbium-doped fiber laser and its application in tandem pump.

More Than 6 Kw Near Single-Mode Fiber Amplifier Based on a Bidirectional Tandem Pumping Scheme.

A 2.14 Kw Tandem Pumped Fiber Amplifier

Comprehensive Investigations on the Tandem Pumping Scheme Employing the Pump Fiber Laser Operating at an Extremely Short Wavelength.

A 168-W High-Power Single-Frequency Amplifier in an All-Fiber Configuration

The 5.4 Kw Output Power of the Ytterbium-Doped Tandem-Pumping Fiber Amplifier

10 Kw Tandem Pumping Fiber Amplifier with Good Beam Quality Based on Tapered Ytterbium-Doped Fiber.

High-Efficiency Pulsed Tm-Doped Fiber Amplifier

Preliminary theoretical analysis of high-power Yb-doped fiber amplifiers tandem-pumped by short-wavelength fiber lasers

More Than 5 Kw Counter Tandem Pumped Fiber Amplifier with Near Single-Mode Beam Quality

High-power Tandem-Pumped Fiber Amplifier with Beam Quality Maintenance Enabled by the Confined-Doped Fiber.

126 W Fiber Laser at 1018 Nm and Its Application in Tandem Pumped Fiber Amplifier

252 W core-pumped single-frequency all-fiber amplifier at 1064 nm

High-Power 1120-Nm Yb-Doped Fiber Laser and Amplifier

Over 250 W Low Noise Core-Pumped Single-Frequency All-Fiber Amplifier

20 Kw Monolithic Fiber Amplifier with Directly Dual-Wavelength Laser Diodes Counter Pumping

High-efficiency All-Fiber Raman Fiber Amplifier with Record Output Power