Frequency-upconversion Photon-Number-resolving Detector for Wavelengths Around 1 Μm

K. Huang,X. Gu,M. Ren,Y. Jian,H. Pan,G. Wu,E Wu,H. Zeng

DOI: https://doi.org/10.1364/nlo.2011.nmb2

2011-01-01

Nonlinear Optics

Abstract:We demonstrated the photon-number-resolving detection at 1.04 μm by coincidence frequency upconverison. A total detection efficiency of 3.2% was achieved with a quite low background noise probability of 0.0002 per pulse.

What problem does this paper attempt to address?

Photon-number-resolving detection at 1.04 μm by coincidence frequency upconversion

Kun Huang,Xiaorong Gu,Min Ren,Yi Jian,Haifeng Pan,E. Wu,Heping Zeng

DOI: https://doi.org/10.1364/cleo_at.2011.jthb16

2011-01-01

Abstract:We demonstrated the photon-number-resolving detection at 1.04 μm by coincidence frequency upconverison. The detection efficiency of 6.8% was obtained. The Poissionian distribution of the up-converted photons was observed directly.
Photon-Number-Resolving Detection At 1.04 Mu M By Coincidence Frequency Upconversion

K. Huang,X. Gu,M. Ren,Y. Jian,H. Pan,E. Wu,H. Zeng

2011-01-01

Abstract:We demonstrated the photon-number-resolving detection at 1.04 mu m by coincidence frequency upconversion. The detection efficiency of 6.8% was obtained. The Poissionian distribution of the up-converted photons was observed directly. (C) 2011 Optical Society of America
1064-Μm-band Up-Conversion Single-Photon Detector

Fei Ma,Ming-Yang Zheng,Quan Yao,Xiu-Ping Xie,Qiang Zhang,Jian-Wei Pan

DOI: https://doi.org/10.1364/oe.25.014558

IF: 3.8

2017-01-01

Optics Express

Abstract:Based on the technique of periodically poled lithium niobate waveguide, up-conversion single-photon detection at 1.064-μm is demonstrated. We have achieved a system photon detection efficiency of 32.5% with a very low noise count rate of 45 counts per second by pumping with a 1.55-μm-band single frequency laser using the long-wavelength pumping technique and exploiting volume Bragg grating as a narrow band filter. Replacing the volume Bragg grating with a combination of adequate dielectric filters, a detection efficiency of up to 38% with a noise count rate of 700 counts per second is achieved, making the overall system stable and practical. The up-conversion single-photon detector operating at 1.064 μm can be a promising robust counter and find usage in many fields.
Quantum Detector Tomography of the Infrared Single-Photon Frequency Upconversion Detection System

Jianhui Ma,Xiuliang Chen,Huiqin Hu,Haifeng Pan,E Wu,Heping Zeng

DOI: https://doi.org/10.1364/qim.2017.qw2a.3

2017-01-01

Abstract:We demonstrated a quantum detector tomography of a synchronously pumped infrared single-photon frequency upconversion detector. A maximum detection efficiency of 37.6% was achieved at 1558 nm with a background noise about 1.0×10−3counts/pulse.
Mid-infrared Photon Counting and Resolving Via Efficient Frequency Upconversion

Kun Huang,Yinqi Wang,Jianan Fang,Weiyan Kang,Ying Sun,Yan Liang,Qiang Hao,Ming Yan,Heping Zeng

DOI: https://doi.org/10.1364/prj.410302

IF: 7.6

2021-01-01

Photonics Research

Abstract:Optical detectors with single-photon sensitivity and large dynamic range would facilitate a variety of applications. Specifically, the capability of extending operation wavelengths into the mid-infrared region is highly attractive. Here we implement a mid-infrared frequency upconversion detector for counting and resolving photons at 3 μm. Thanks to the spectrotemporal engineering of the involved optical fields, the mid-infrared photons could be spectrally translated into the visible band with a conversion efficiency of 80%. In combination with a silicon avalanche photodiode, we obtained unprecedented performance with a high overall detection efficiency of 37% and a low noise equivalent power of 1.8 × 10 − 17 W / Hz 1 / 2 . Furthermore, photon-number-resolving detection at mid-infrared wavelengths was demonstrated, for the first time to our knowledge, with a multipixel photon counter. The implemented upconversion detector exhibited a maximal resolving photon number up to 9 with a noise probability per pulse of 0.14% at the peak detection efficiency. The achieved photon counting and resolving performance might open up new possibilities in trace molecule spectroscopy, sensitive biochemical sensing, and free-space communications, among others.
Efficient Single-Photon Frequency Upconversion at 1.06 Μm with Ultralow Background Counts

Huafang Dong,Haifeng Pan,Yao Li,E. Wu,Heping Zeng

DOI: https://doi.org/10.1063/1.2968311

IF: 4

2008-01-01

Applied Physics Letters

Abstract:We demonstrated an efficient single-photon frequency upconversion system for the infrared photons at 1.06 μm with ultralow background counts. By pumping the system at a longer wavelength than that of the single-photon signal, the background counts caused by the pump-induced parametric fluorescence in the nonlinear crystal were reduced markedly. We achieved so far the lowest noise of ∼150/s for a near unity conversion efficiency.
Ultra-broadband Microfiber-Coupled Superconducting Single-Photon Detector

Xintong Hou,Ni Yao,Lixing You,Hao Li,Yong Wang,Weijun Zhang,Heqing Wang,Xiaoyu Liu,Wei Fang,Limin Tong,Zhen Wang,Xiaoming Xie

DOI: https://doi.org/10.1364/oe.27.025241

IF: 3.8

2019-01-01

Optics Express

Abstract:Broadband photon detectors are a key enabling technology for various applications such as spectrometers, light detection and ranging. In this work, we report on an ultra-broadband single-photon detector based on a microfiber (MF)-coupled superconducting nanowires structure operating in the spectral range from visible to near-infrared light. The MF-coupled superconducting nanowire single-photon detector (SNSPD) is formed by placing an MF on top of superconducting niobium nitride (NbN) nanowires, allowing ultra-broadband photon detection due to their nearly lossless transmission/absorption and nearly unity internal efficiency for ultra-broad waveband. The simulation results indicate that with optimal device structure, the optical absorption with efficiency > 90% can be realized over a wavelength range of 350 nm to 2150 nm. The fabricated MF-coupled SNSPD shows unparalleled broadband system detection efficiencies (SDEs) of more than 50% from 630 nm to 1500 nm. The SDEs reach 66% at 785 nm and 45% at 1550 nm. These results pave the way for ultra-broadband weak light detection with quantum-limit sensitivity.
Mid-Infrared Photon-Number-Resolving Detection Based On Efficient Nonlinear Frequency Conversion

Weiyan Kang,Jiamei Wu,Yan Liang,Ming Yan,Kun Huang,Heping Zeng

DOI: https://doi.org/10.1364/CLEO_SI.2020.SW4N.4

2020-01-01

Abstract:We have implemented a coincidence-pumping frequency upconversion system with a nonlinear conversion efficiency up to 80%, which enabled to demonstrate high-performance mid-infrared photon detection and photon-number-resolving capability at 3.1 mu m. (c) 2020 The Author(s)
A Compact Upconversion Single-Photon Imager for Full-Range and Accurate 3-D Imaging

Yiwei Chen,Chen Jiang,Yong Liu,Hongye Su,Xiaomin Hu,Yu Pan

DOI: https://doi.org/10.1109/tim.2023.3280500

IF: 5.6

2023-01-01

IEEE Transactions on Instrumentation and Measurement

Abstract:The rapid development of single-photon detection technology offers the possibility for an imaging system to go beyond traditional limits. Recently, single-photon imagers based on the upconversion technique have achieved unprecedentedly high resolution and noise tolerance in 3-D imaging. Nevertheless, the limited imaging range, complicated optical path, and long data acquisition time impose remaining challenges to practical applications. In this work, we build an upconversion single-photon imager for full-range and accurate 3-D imaging. A compact all-fiber design allows our system to work robustly in an open environment. Compared to the previous imagers, the imaging speed is increased by three orders of magnitude due to the high upconversion efficiency and photon-efficient algorithm. With the application of a high-repetition laser and a nanosecond optical delay line (ODL), we achieve full-range imaging under the upconversion scheme against high solar background noise. For close-up scenes, our imager achieves ultrahigh axial resolution up to 20 mu m, which is not affected by the time jitter or pileup effect of the single-photon detector. Our proposal can stimulate practical applications in sophisticated scenarios.
High-Speed Single-Photon Frequency Upconversion with Synchronous Pump Pulses

Xiaorong Gu,Yao Li,Haifeng Pan,E. Wu,Heping Zeng

DOI: https://doi.org/10.1109/jstqe.2009.2024329

IF: 4.9

2009-01-01

IEEE Journal of Selected Topics in Quantum Electronics

Abstract:Single-photon signals at 1.56 mu m were converted into the visible region by sum-frequency generation, with synchronous pump pulses at 1.03 mu m in a periodically poled lithium niobate crystal. The signal and pump sources were provided by two synchronized mode-locked fiber lasers at the operation rate of 7.88 MHz. Such a high-speed single-photon upconversion system has shown an overall detection efficiency of 10.4%. The corresponding background noise was measured to be 3.3 x 10(3) s(-1). The noise-equivalent power in this scheme was 9.93 x 10(-17) W/Hz(1/2), which was the lowest compared to the other upconversion systems with similar pump and signal wavelengths.
Temporal and Spectral Control of Single-Photon Frequency Upconversion for Pulsed Radiation

Xiaorong Gu,Kun Huang,Yao Li,Haifeng Pan,E. Wu,Heping Zeng

DOI: https://doi.org/10.1063/1.3374330

IF: 4

2010-01-01

Applied Physics Letters

Abstract:We demonstrate efficient single-photon detection at 1.04 μm with quite low background counts by using the frequency upconversion detection technique with pulsed single-photon source and strong pump field prepared from two synchronized fiber lasers. Temporal and spectral control of the pump and signal lasers enabled an upconversion efficiency of 81.1%. As the system was pumped at a wavelength longer than that of the signal, the corresponding background counts were reduced down to 1.5×103 s−1 due to efficient suppression of parametric fluorescence in the periodic poled lithium niobate crystal.
Quantum detector tomography of a single-photon frequency upconversion detection system.

Jianhui Ma,Xiuliang Chen,Huiqin Hu,Haifeng Pan,E Wu,Heping Zeng

DOI: https://doi.org/10.1364/OE.24.020973

IF: 3.8

2016-01-01

Optics Express

Abstract:We experimentally presented a full quantum detector tomography of a synchronously pumped infrared single-photon frequency upconversion detector. A maximum detection efficiency of 37.6% was achieved at the telecom wavelength of 1558 nm with a background noise about 1.0 × 10-3 counts/pulse. The corresponding internal quantum conversion efficiency reached as high as 84.4%. The detector was then systematically characterized at different pump powers to investigate the quantum decoherence behavior. Here the reconstructed positive operator valued measure elements were equivalently illustrated with the Wigner function formalism, where the quantum feature of the detector is manifested by the presence of negative values of the Wigner function. In our experiment, pronounced negativities were attained due to the high detection efficiency and low background noise, explicitly showing the quantum feature of the detector. Such quantum detector could be useful in optical quantum state engineering, quantum information processing and communication.
High-Efficiency Broadband Near-Infrared Single-Photon Frequency Upconversion and Detection

Jian-Hui Ma,Hui-Qin Hu,Yu Chen,Guang-Jian Xu,Hai-Feng Pan,E. Wu

DOI: https://doi.org/10.1088/0256-307x/37/3/034202

2020-01-01

Abstract:We propose and demonstrate a high efficiency broadband near infrared single-photon upconversion and detection with a broadband pump laser based on sum frequency conversion in the PPLN crystal.By using a pump laser centered at 1040nm with a spectral bandwidth of 10nm,the signal single-photons centered at 1562nm with a broadband bandwidth up to 7.2nm are frequency-converted from the near infrared to the visible regime.A maximum conversion efficiency of 18.8％ is achieved,while the background noise is measured to be only 1.2 × 10-3 counts/pulse.The corresponding spectral linewidth of the upconverted photons is 0.2nm.This scheme of broadband infrared single-photon upconversion and detection provides potential solutions in infrared laser ranging,broadband infrared imaging and quantum key distribution.
Efficient Mid-Infrared Single-Photon Frequency Upconversion Detection with Ultra-Low Background Counts

Xiaorong Gu,Kun Huang,Haifeng Pan,E. Wu,Heping Zeng

DOI: https://doi.org/10.1088/1612-2011/10/5/055401

IF: 1.704

2013-01-01

Laser Physics Letters

Abstract:We demonstrate an efficient mid-infrared single-photon detection system with ultra-low background counts based on the frequency upconversion detection technique. The signal photons of 3.39 mu m came from a He-Ne laser and the pump beam was provided by a mode-locked ytterbium-doped fiber laser. Taking into account the pulsed pumping and continuous-wave signaling scheme, the peak conversion efficiency of 64% was achieved at an average pump power of 28.3 mW. The corresponding detection efficiency was inferred to be 6.1% with ultra-low background counts of 400 s(-1).
Efficient and stable single-photon counting at 1.55 microm by intracavity frequency upconversion.

Haifeng Pan,Heping Zeng

DOI: https://doi.org/10.1364/OL.31.000793

IF: 3.6

2006-01-01

Optics Letters

Abstract:A single-photon signal at 1.55 microm was converted to the visible region by sum-frequency mixing with a strong pumping beam at 1064 nm in a periodically poled lithium niobate crystal placed in a diode-pumped Nd:YVO4 laser cavity. As the intracavity pump laser could be automatically stabilized without cavity lock, robust long-term stability was demonstrated for single-photon frequency upconversion, with a conversion efficiency of 74.3%. Such a stable single-photon upconversion was demonstrated to be efficient and robust for single-photon counting at 1550 nm, and the corresponding background noise was measured at less than 420 x 10(3) s(-1).
Upconversion Single Photon Detection Near 2 Um

Guo-Liang Shentu,Xiu-Xiu Xia,Qi-Chao Sun,Jason S. Pelc,M. M. Fejer,Qiang Zhang,Jian-Wei Pan

DOI: https://doi.org/10.1364/ol.38.004985

2013-01-01

Abstract:We have demonstrated upconversion detection at the single photon level in the 2 um spectral window using a pump wavelength near 1550nm, a periodically poled lithium niobate (PPLN) waveguide, and a volume Bragg grating (VBG) to reduce noise. We achieve a system photon detection efficiency of 10%, with a noise count rate of 24,500 counts per second, competitive with other 2 um single photon detection technologies. This detector has potential applications in environmental gas monitoring, life science, and classical and quantum communication.
Efficient and Stable Single-Photon Counting at 155 Μm by Intracavity Frequency Upconversion

Haifeng Pan,Heping Zeng

DOI: https://doi.org/10.1364/ol.31.000793

IF: 3.6

2006-01-01

Optics Letters

Abstract:A single-photon signal at 1.55 μm was converted to the visible region by sum-frequency mixing with a strong pumping beam at 1064 nm in a periodically poled lithium niobate crystal placed in a diode-pumped Nd:YVO4 laser cavity. As the intracavity pump laser could be automatically stabilized without cavity lock, robust long-term stability was demonstrated for single-photon frequency upconversion, with a conversion efficiency of 74.3%. Such a stable single-photon upconversion was demonstrated to be efficient and robust for single-photon counting at 1550 nm, and the corresponding background noise was measured at less than 420×103 s−1.
Efficient and stable single-photon counting at 1.55 μm by intracavity frequency upconversion

Haifeng Pan,Heping Zeng

DOI: https://doi.org/10.1364/OL.31.000793

IF: 3.6

2006-01-01

Optics Letters

Abstract:A single-photon signal at 1.55 mu m was converted to the visible region by sum-frequency mixing with a strong pumping beam at 1064 nm in a periodically poled lithium niobate crystal placed in a diode-pumped Nd:YVO4 laser cavity. As the intracavity pump laser could be automatically stabilized without cavity lock, robust long-term stability was demonstrated for single-photon frequency upconversion, with a conversion efficiency of 74.3%. Such a stable single-photon upconversion was demonstrated to be efficient and robust for single-photon counting at 1550 nm, and the corresponding background noise was measured at less than 420 X 10(3) s(-1). (c) 2006 Optical Society of America.
Efficient Single-Photon Counting at 1.55μm by Intracavity Frequency Upconversion in a Unidirectional Ring Laser

Haifeng Pan,Huafang Dong,Heping Zeng,Wei Lu

DOI: https://doi.org/10.1063/1.2378588

IF: 4

2006-01-01

Applied Physics Letters

Abstract:A single-photon signal at 1.55μm was converted to its visible replica by sum-frequency mixing with a strong intracavity pump of a unidirectional ring laser at 1.06μm in a periodically poled lithium niobate (PPLN) crystal. In the ring laser configuration, standing-wave photorefractive effects in the PPLN crystal could be suppressed and consequently, the spectral bandwidth of the intracavity pump could be controlled for excellent quasi-phase-matching. A conversion efficiency of 96% was demonstrated, and the corresponding background counts were less than 6.0×105s−1. The single-photon upconversion was used for efficient single-photon counting at 1.55μm with long-term stability.

Frequency-upconversion Photon-Number-resolving Detector for Wavelengths Around 1 Μm

Photon-number-resolving detection at 1.04 μm by coincidence frequency upconversion

Photon-Number-Resolving Detection At 1.04 Mu M By Coincidence Frequency Upconversion

1064-Μm-band Up-Conversion Single-Photon Detector

Quantum Detector Tomography of the Infrared Single-Photon Frequency Upconversion Detection System

Mid-infrared Photon Counting and Resolving Via Efficient Frequency Upconversion

Efficient Single-Photon Frequency Upconversion at 1.06 Μm with Ultralow Background Counts

Ultra-broadband Microfiber-Coupled Superconducting Single-Photon Detector

Mid-Infrared Photon-Number-Resolving Detection Based On Efficient Nonlinear Frequency Conversion

A Compact Upconversion Single-Photon Imager for Full-Range and Accurate 3-D Imaging

High-Speed Single-Photon Frequency Upconversion with Synchronous Pump Pulses

Temporal and Spectral Control of Single-Photon Frequency Upconversion for Pulsed Radiation

Quantum detector tomography of a single-photon frequency upconversion detection system.

High-Efficiency Broadband Near-Infrared Single-Photon Frequency Upconversion and Detection

Efficient Mid-Infrared Single-Photon Frequency Upconversion Detection with Ultra-Low Background Counts

Efficient and stable single-photon counting at 1.55 microm by intracavity frequency upconversion.

Upconversion Single Photon Detection Near 2 Um

Efficient and Stable Single-Photon Counting at 155 Μm by Intracavity Frequency Upconversion

Efficient and stable single-photon counting at 1.55 μm by intracavity frequency upconversion

Efficient Single-Photon Counting at 1.55μm by Intracavity Frequency Upconversion in a Unidirectional Ring Laser