Large Electric-Induced Pyroelectric Properties in (pb0.87la0.02ba0.1) (Zr0.7sn0.24ti0.06)o-3 Antiferroelectric Ceramics with Excess Pbo

Qingfeng Zhang,Shenglin Jiang,Yike Zeng,Maoyan Fan,Guangzu Zhang,Yangyang Zhang,Yan Yu,Jing Wang,Jungang He

DOI: https://doi.org/10.1063/1.3596577

IF: 2.877

2011-01-01

Journal of Applied Physics

Abstract:(Pb0.87La0.02Ba0.1) (Zr0.7Sn0.24Ti0.06)O3 (PLBZST) antiferroelectric ceramics with the addition of 0–9 wt. % excess PbO were fabricated by the conventional solid-state reaction process, and their microstructure, dielectric, and pyroelectric properties were systemically investigated. When excess PbO content was less than 9 wt. %, two pyrochlore phases were formed along with the perovskite phase. Compared with common specimens, PLBZST antiferroelectric ceramics with excess PbO exhibited a higher pyroelectric coefficient and a lower dielectric loss, which are beneficial for the development of pyroelectric devices. Around the Curie temperature, as the excess PbO increased from 0 wt. % to 9 wt. %, PLBZST ceramics’ pyroelectric coefficient increased from 1600 μC/m2K to 4000 μC/m2K, and the figure of merit increased from 40 × 10−5 Pa−0.5 to 140 × 10−5 Pa−0.5 under a 400 V/mm dc field. The largest figure of merit of 200 × 10−5 Pa−0.5, which is about 8 times higher than that of conventional phase transition materials barium strontium titanate (BST), was obtained in PLBZST ceramics with 6 wt. % excess PbO when a 600 V/mm dc bias field was applied. Therefore, improvement of pyroelectric property is beneficial for the development of infrared detectors.