Abstract:This study conducts an optimized design and a comprehensive high-frequency theoretical analysis on a T-shaped, four-period resonant slow-wave structure. By employing the image theory, the T-shaped waveguide unit was translated into an equivalent ridge waveguide configuration. The high-frequency characteristics of the equivalent ridge waveguide were analyzed using equivalent circuit theory, leading to a resonant frequency and structural analysis of the T-shaped waveguide. The analysis has confirmed that in the ridge waveguide, starting from the second-highest order mode, the frequency points of the even-order modes exhibit a strong correspondence with those of the T-shaped waveguide; however, the odd-order modes lack a corresponding mode in the T-shaped waveguide, as they do not fulfill the electric boundary conditions dictated by the image method. On this basis, a T-shaped four-period resonant slow-wave structure was constructed, and its dispersion characteristics were analyzed to determine the resonant modes and frequencies, as well as the range of mode synchronization voltages. Simulations were subsequently performed to validate the effectiveness of the relativistic extended interaction radiation source, which incorporated the novel T-shaped periodic resonant slow-wave structure. Advanced three-dimensional particle simulations, in conjunction with optimization techniques, facilitated the achievement of a high-power microwave output at a frequency of 9.8 GHz, delivering an average power of 71.4 MW. This output was attained under conditions of a 448 kV beam voltage, 400 A beam current, and a 0.4 T uniform axial magnetic field, which resulted in an electron efficiency of 39.8%. This structure, characterized by the T-shaped waveguide, was demonstrated to be capable of producing high-efficiency, high-power microwaves with fewer periods, presenting a compact and efficient solution for the generation of high-power microwaves in advanced scientific applications.

Optimization of Slow Wave Structures of Space Traveling Wave Tube Based on Collectability of Spent Beam

Efficiency Enhancement of Space TWT based on Collectability

Optimization Design of Slow Wave Structure Using Genetic Algorithm

Numerical Optimization of Pitch Profile Foroverall Efficiency Enhancement of a Space TWT

Optimum Design of Electron Gun for 0.22-Thz Traveling Wave Tubes

A High-Power Sheet Beam Slow-Wave Structure of Traveling Wave Tubes

Finite Element Method Based on High Order Mesh for Traveling-wave Tube Simulation

Design of a Beam-coupling System for a Chip-integrated Spectrometer with a Discrete Linear Waveguide

Research and Design of Magnetic Field in Transition Area for Traveling-Wave Tubes

A Low Loss Slow Wave Structure Based on HCG SSP for Traveling Wave Tube Applications

A Symmetrical Quasi-Synchronous Step-Transition Folded Waveguide Slow Wave Structure for 650 GHz Traveling Wave Tubes

Simulation Studies on W-Band Traveling-Wave Tube with Double Rectangular Comb Slow-Wave Structure

Simulation and Experiment of High Efficiency Slow Wave Structure of a 26.5-40GHz Helix-TWT

Development of an E-Band CW Space TWT With Substantial Improvement in Performance

The Small Signal Theory Analysis and Optimization Design of High Efficiency Broadband TWTs

Design of a Low Voltage and High Power Traveling Wave Tube Based on a Sheet-Beam Rectangular Ring-Bar Slow-Wave Structure

Optimization Of The Watt-Scale 220-Ghz Folded Waveguide Bwo

A Novel Low Loss Sawtooth Slow Wave Structure for 0.66-THz Traveling Wave Tubes

Analysis and simulation of X-band high-power microwave generation based on T-shaped four-period slow-wave structure

Optimization and Simulation of a Relativistic Backward Wave Oscillator with a Slow Wave Structure

Design of electron optical system of millimeter electrostatically focused traveling wave tube