Abstract:PbO glass has an adverse effect on the environment; the bismuth glass has a high refractive index, low melting temperature, softening temperature, and glass transition temperature (Tg), so that it can be used as a lead-free glass, used in optoelectronics, electronics, optics, and other components, which bismuth glass has been proved to be an important replacement material. Due to the higher melting temperature, Bi3+ ions tend to partially reduce to the low valence state of Bi0, which in turn causes coloration of the glass. In this experiment, the absorption peaks of glass oxidized brown color were observed at about 470 nm at 1,100°C (Bi2O3 = 40, 45 mol%) and 1,000°C (Bi2O3 = 40 mol%) for these three curves. The bismuth glass produced by high-temperature melting is not suitable for optical applications; by adding an oxidant (Sb2O3), which inhibits the reduction reaction of bismuth ions and maintains the ions in the state of Bi3+, the glass becomes more transparent in appearance and the transmittance is also improved and raised to approximately 75%–80%, which proves that appropriate additives are sufficient to greatly improve the application of bismuth glass for optical components. In the research process, the density and molar volume were measured by Archimedes method, Raman analysis was used to explore the influence of its structural changes, UV/Vis spectroscopy was used to measure the transmittance and absorption spectra for analysis and discussion, and TMA was used to observe the thermal properties, in the hope of developing a good optical properties of the glass, and the present experiments have confirmed that the addition of a small amount of Sb2O3 changes the color of the glass from black to a light yellow, which can be better used in the optical glass.

Elimination of the Coherent Effect in the Optical Kerr Measurement of Bismuth Glass Using Supercontinuum

Polarization Dependence of Femtosecond Optical Kerr Signals in Bismuth Glasses

Ultrafast nonlinear optical properties of Bi2O3–B2O3–SiO2 oxide glass

Femtosecond Optical Kerr Effect Measurement Using Supercontinuum for Eliminating the Nonlinear Coherent Coupling Effect

Influence of Self-Diffraction Effect on Femtosecond Pump-Probe Optical Kerr Measurements

Effect Of Bi2o3 On The Spectroscopic Properties Of Erbium-Doped Bismuth Silicate Glasses

Shape Measurement Of Objects Using An Ultrafast Optical Kerr Gate Of Bismuth Glass

Efficient Optical Kerr Gate of Bi2O3–B2O3–SiO2glass for Acquiring High Contrast Ballistic Imaging in Turbid Medium

Influence of Self-Focusing Effect on Femtosecond Collinear Nondegenerate Optical Kerr Measurements

High Time-Resolved Three-Dimensional Imaging Using Ultrafast Optical Kerr Gate of Bismuth Glass

Cross-Kerr Effect on an Optomechanical System

Control of the Gated Spectra with Narrow Bandwidth from A Supercontinuum Using Ultrafast Optical Kerr Gate of Bismuth Glass

The Study on the Decolorization and Properties of Bismuth Glass

Optical Characterization of Ultraviolet Laser Photosensitive Er3+-doped Bismuth-Silicate Glasses

Linear and Nonlinear Optical Characteristics of Bismuth-Modified Lead-Silicate Glasses

Effect of SiO 2 on optical properties of bismuth-doped B 2 O 3 –GeO 2 –SiO 2 glasses

Ultrafast Nonlinear Optical Responses of Bismuth Doped Silicon-Rich Silica Films

Measurement of Nonlinear Refractive Index Coefficient Using Emission Spectrum of Filament Induced by Gigawatt-Femtosecond Pulse in BK7 Glass.

Spectroscopic Properties and Thermal Stability of A New Erbium-Doped Bismuth-Based Glass

The Optical Nonlinearity and Structure for a PbO, TiO2, SiO2, and K2O Quaternary Glass System

Effect of Ga2O3 on the spectroscopic properties of erbium-doped boro-bismuth glasses