Abstract:Silicon and germanium are waveguide core materials for Si-based Group-IV integrated photonic circuit applications in the mid-infrared (MIR) wavelength range defined here as 2 to 15 um. In particular, Si and Ge are transparent up to 8 and 15 μm respectively, thus offering applications in communications and the sensing of biochemical, medical, and environmental variables [1]. The major problem with the MIR transition is that the most dominant platform of SOI can be used only up to 4 μm due to the high absorption loss of silicon dioxide. Therefore alternative material platforms have to be utilized for longer wavelengths. Presently, the Ge-on-Si platform (known as GOS) has been demonstrated to be workable to 15 μm-thereby offering potential for MIR applications. However, the refractive index contrast between Ge (n=4.1) and Si (n=3.4) is considerably less than that of SOI. As a result, the bend radii in GOS must be considerably larger than those in SOI, causing the footprint of GOS on-chip sensor circuits to be generally larger than those of SOI, an unwanted increase in “real estate.” What is wanted is a better alternative Ge-waveguide platform that will provide a larger core-clad index contrast than GOS as well as useful transparency and smaller channel-bend radii. To achieve those goals, the new structure proposed and realized here is Germanium on Silicon Nitride (Ge-on-Si3N4) which is referred-to here as GON. The refractive index of silicon nitride is 2.4 and it is transparent up to ~7 μm. So the index contrast in GON is 1.7 compared to 0.7 in GOS. Our simulation results show that this structure can provide a more compact integrated network whose bend radii are only a few μm. Most importantly, we have developed a new and practical wafer bonding and layer transfer technique, reported here, to realize GON.

Attenuated Total Reflection Geo2 Hollow Waveguide For 9.6-11.7 Mu M Infrared Light Transmission

Study on Hollow-Waveguides of Polystyrene-Coated Silver-Glass for Transmission of Infrared Laser Energy

Single-crystal Y_2O_3-ZrO_2 Rectangular Waveguides for Ultrahigh-Temperature Sensing Applications

Large-Bore Hollow Glass Waveguides for Transmission of Solar Energy

Low-Temperature, Low-Cost Growth of Robust Atr Geo2 Hollow Fibers Based on Copper Capillary Tubes for Transmission of Co2 Laser Light

Metallic Attenuated Total Reflection Infrared Hollow Fibers for Robust Optical Transmission Systems

Germanium-On-Silicon Nitride Waveguides for Mid-Infrared Integrated Photonics

Modeling and Fabrication of Ge-on-Si3N4 for Low Bend-Loss Waveguides

Mid-infrared Nonlinear Silicon Hybrid Waveguide with High Figure of Merit

KLu(WO4)2/SiO2 Tapered Waveguide Platform for Sensing Applications

Long-wave infrared 1 × 2 MMI based on air-gap beneath silicon rib waveguides.

Enhanced and Suppressed Infrared Transmission Through Germanium Subwavelength Arrays

Transmission measurement at 10.6 microns of Te2As3Se5 rib-waveguides on As2S3 substrate

Big Bore and Extremely Flexible Mid-Infrared Hollow Waveguide for Gas Absorption Module

Thin Hollow Glass Waveguide for Near Ir Radiation Delivery

Infrared Ag/AgI Hollow Waveguides with High Performance

Characterization Of Gas Absorption Modules Based On Flexible Mid-Infrared Hollow Waveguides

Single-scan Ultrafast Laser Inscription of Waveguides in IG2 for Type-I and Type-Ii Operation in the Mid-Infrared.

GeAsSeTe/GeAsSe Pedestal Waveguides for Long-Wave Infrared Tunable on-Chip Spectroscopy

High-Birefringence Low-Loss Hollow-Core THz Waveguide Embedded Parallel Slab Cladding

Low-loss SiGe waveguides for mid-infrared photonics fabricated on 200 mm wafers