Abstract:In this paper, a full-scale model of Low Vibration Track was established and three working conditions were applied to a single bearing block; these include: vertical load at the end of the track slab, combination of horizontal and vertical load at the end of the track slab, and vertical load at the middle of the track slab. By applying four times static wheel load to the full-scale model, the relationship between the stress of the track structure and the load under different working conditions was investigated. The corresponding load values were obtained when the track slab and the bearing block reached the axial tensile strength of the concrete. Through the static load test, the weak position of the track structure was found, and the development trend of the crack was obtained. (1) Obtained the maximum stress of the concrete of the track slab at the corner of the bearing block, the maximal stress of the concrete of the track slab, the stress at the bottom of the bearing block, and the stress at the bottom of the bearing block under different working conditions. (2) The horizontal load of the train increased the force of the track slab concrete at the corners of the bearing block. (3) Compared the strain of different location of the track slab and different working conditions. (4) Observed the positions of slight crack and its development trend appeared on track slabs in different working conditions. (5) For the weak part of the track structure, it can be improved by measures such as increasing the thickness of the end of the track slab and arranging stirrups in the track slab around the support block. The research results provide reference for the design, application and maintenance of Low Vibration Track in the heavy-haul railway tunnel.

Dynamical Analysis Model and Parameters Research on Rubber Floating Slab Track Structure

Analysis Model of Vertical Vibration for Rubber Floating Slab Track

Dynamic Coefficient of Slab Track System on Subgrade under High-Speed Trains

Optimum Analysis of Vibration Reduction Performance for Floating Slab Track Based on Shear Hinge

Dynamic Analysis of a Slab Track on the Poroelastic Soil Subjected to Moving Loads

A Theoretical Investigation on Influences of Slab Tracks on Vertical Dynamic Responses of Railway Viaducts

Vibration-reduction optimization of the point-supporting floating-slab track based on local resonance mechanism

Study of Ground Vibration from Trains Caused by Track Irregularities

Simulation Analysis of Wheel and Track Based on Floating Slab Track

Theoretical modelling of a vehicle-slab track coupled dynamics system considering longitudinal vibrations and interface interactions

An analytical approach for slab track vibration with train-track-ground coupling effect

Experimental study on mechanical properties of heavy-haul low-vibration track under train static load

Influence of Vibration Isolator Failure on Vehicle Operation Performance and Floating Slab Track Structure Vibration Reduction Effectiveness

Vibration Response Analysis of the Short Floating Slab Track System——Board Structure Parameters

Environmental noise and vibration characteristics of rubber-spring floating slab track

Ground Vibration Caused by Axle Load and Dynamic Wheel-Rail Force of a Moving Train

Refined dynamic analysis of three slab tracks on bridge structures under various high-speed train loads

Dynamic Analysis of Slab Track with Crack Considering Rail Corrugation

The Method for Dynamic Modeling and Simulation of Rubber Track System

Technical Note: Three-dimensional analyses of dynamic responses of track-ground system subjected to a moving train load

Experimental and numerical investigation of the track structure elasticity induced by resilient fastener on vehicle-track interaction and train running stability