Abstract:The use of superhydrophobic surfaces in a broad range of applications is receiving a great deal of attention due to their numerous functionalities. However, fabricating these surfaces using low-cost raw materials through green and fluorine-free routes has been a bottleneck in their industrial deployment. This work presents a facile and environmentally friendly strategy to prepare mechanically robust superhydrophobic surfaces with engineered lotus leaf mimetic multiscale hierarchical structures via a hybrid route combining soft imprinting and spin-coating. Direct soft-imprinting lithography onto starch/polyhydroxyurethane/cellulose nanocrystal (SPC) films formed micro-scaled features resembling the pillar architecture of lotus leaf. Spin-coating was then used to assemble a thin layer of low-surface-energy poly(dimethylsiloxane) (PDMS) over these microstructures. Silica nanoparticles (SNPs) were grafted with vinyltriethoxysilane (VTES) to form functional silica nanoparticles (V-SNPs) and subsequently used for the fabrication of superhydrophobic coatings. A further modification of PDMS@SPC film with V-SNPs enabled the interlocking of V-SNPs microparticles within the cross-linked PDMS network. The simultaneous introduction of hierarchical microscale surface topography, the low surface tension of the PDMS layer, and the nanoscale roughness induced by V-SNPs contributed to the fabrication of a superhydrophobic interface with a water contact angle (WCA) of ∼150° and a sliding angle (SA) of <10°. The PDMS/V-SNP@SPC films showed an ∼52% reduction in water vapor transmission rate compared to that of uncoated films. These results indicated that the coating served as an excellent moisture barrier and imparted good hydrophobicity to the film substrate. The coated film surfaces were able to withstand extensive knife scratches, finger-rubbing, jet-water impact, a sandpaper-abrasion test for 20 cycles, and a tape-peeling test for ∼10 repetitions without losing superhydrophobicity, suggesting superior mechanical durability. Self-cleaning behavior was also demonstrated when the surfaces were cleared of artificial dust and various food liquids. The green and innovative approach presented in the current study can potentially serve as an attractive new tool for the development of robust superhydrophobic surfaces without adverse environmental consequences.

Fabrication of biomimetic superhydrophobic surfaces inspired by lotus leaf and silver ragwort leaf.

Fabrication of a Novel Superhydrophobic and Superoleophilic Surface by One-Step Electrodeposition Method for Continuous Oil/water Separation

Biomimetic Nanofiber Patterns with Controlled Wettability

Abrasion‐Resistant, Hot Water‐Repellent and Self‐Cleaning Superhydrophobic Surfaces Fabricated by Electrophoresis of Nanoparticles in Electrodeposited Sol–Gel Films

Fabrication of flexible superhydrophobic biomimic surfaces

Feedback System Control Optimized Electrospinning for Fabrication of an Excellent Superhydrophobic Surface

Facile Fabrication of Superhydrophobic Nanocomposite Coatings Based on Water‐Based Emulsion Latex

Fabrication of Biomimetic Superhydrophobic Surface Using Hierarchical Polyaniline Spheres

Engineering biomimetic superhydrophobic surfaces of electrospun nanomaterials

An easy-to-implement method for fabricating superhydrophobic surfaces inspired by taro leaf

Preparation of a Durable Superhydrophobic Membrane by Electrospinning Poly (vinylidene Fluoride) (PVDF) Mixed with Epoxy–siloxane Modified SiO2 Nanoparticles: A Possible Route to Superhydrophobic Surfaces with Low Water Sliding Angle and High Water Contact Angle

A Lotus Effect-Inspired Flexible and Breathable Membrane with Hierarchical Electrospinning Micro/nanofibers and ZnO Nanowires

PDMS-Based Hierarchical Superhydrophobic Fabric Coating Fabricated by Thermal Treatment and Electrostatic Flocking Technology

Preparation of SiO2/PS superhydrophobic fibers with bionic controllable micro–nano structure via centrifugal spinning

A Novel Multinozzle Electrospinning Process for Preparing Superhydrophobic PS Films with Controllable Bead-on-string/microfiber Morphology

A Novel Fabrication of A Superhydrophobic Surface with Highly Similar Hierarchical Structure of the Lotus Leaf on A Copper Sheet

Biomimetic construction of three-dimensional superhydrophobic microfiber nonwoven fabric

Fabrication of biomimetic superhydrophobic surface with controlled adhesion by electrodeposition

Robust and Eco-Friendly Superhydrophobic Starch Nanohybrid Materials with Engineered Lotus Leaf Mimetic Multiscale Hierarchical Structures

Fabrication of Superhydrophobic Surfaces on FRP Composites: from Rose Petal Effect to Lotus Effect

Controllable Fabrication of Lotus-Leaf-like Superhydrophobic Surface on Copper Foil by Self-Assembly