Abstract:Lignin, being one of the main structural components of lignocellulosic biomass, is considered the most abundant natural source of phenolics and aromatics. Efforts for its valorisation were recently explored as it is mostly treated as waste from heat/energy production via combustion. Among them, polymer-based lignin composites are a promising approach to both valorise lignin and to fine tune the properties of polymers. In this work, organosolv lignin, from beech wood, was used as fillers in a poly (lactic acid) (PLA) matrix. The PLA/lignin composites were prepared using melt mixing of masterbatches with neat PLA in three different lignin contents: 0.5, 1.0 and 2.5 wt%. Lignin was used as-isolated, via the organosolv biomass pretreatment/fractionation process and after 8 h of ball milling. The composites were characterised with Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR) spectroscopy, X-ray Diffraction (XRD), and Differential Scanning Calorimetry (DSC). Additionally, their antioxidant activity was assessed with the 2,2-Diphenyil-1-picrylhydrazyl (DPPH) method, the colour was measured with a colorimeter and the mechanical properties were evaluated with tensile testing. Ball milling, at least under the conditions applied in this study, did not induce a further substantial decrease in the already relatively small organosolv lignin primary particles of ~1 μm. All the produced PLA/lignin composites had a uniform dispersion of lignin. Compression-moulded films were successfully prepared, and they were coloured brown, with ball-milled lignin, giving a slightly lighter colour in comparison with the as-received lignin. Hydrogen bonding was detected between the components of the composites, and crystallization of the PLA was suppressed by both lignin, with the suppression being less pronounced by the ball-milled lignin. All composites showed a significantly improved antioxidant activity, and their mechanical properties were maintained for filler content 1 wt%.

Oxygen Plasma-Treated Enzymatic Hydrolysis Lignin As a Natural Binder for Manufacturing Biocomposites

Properties of Formaldehyde-Free Environmentally Friendly Lignocellulosic Composites Made from Poplar Fibres and Oxygen-Plasma-treated Enzymatic Hydrolysis Lignin

Development of PLA/Lignin Bio-Composites Compatibilized by Ethylene Glycol Diglycidyl Ether and Poly (ethylene glycol) Diglycidyl Ether

Synthesis and Characterization of Poly(lactic acid) Composites with Organosolv Lignin

Thermal and mechanical properties of polyethylene glycol (PEG)-modified lignin/polylactic acid (PLA) biocomposites

Engineering phosphorus-containing lignin for epoxy biocomposites with enhanced thermal stability, fire retardancy and mechanical properties

Dimensionally stable and durable wood by lignin impregnation

Effect of plasma treatment on electrochemical performance of lignin-based carbon fibers

Utilization of lignin upon successive fractionation and esterification in polylactic acid (PLA)/lignin biocomposite

Fully biobased poly(lactic acid)/lignin composites compatibilized by epoxidized natural rubber

Effect of lignin on the structure-property behavior of metal-coordinated and chemically crosslinked ethylene-propylene-diene-monomer composites

Fabrication and characterization of flexible natural cellulosic fiber composites through collaborative modification strategy of sodium hydroxide and γ-Aminopropyl triethoxysilane

Contribution of Lignin in Esterified Lignocellulose Nanofibers (lcnfs) Prepared by Deep Eutectic Solvent Treatment to the Interface Compatibility of LCNF/PLA Composites

Fiber treatment impact on toughness and interfacial bonding in epoxidized soya bean oil compatibilized PLA/PBAT bamboo fiber composites

The Influence of Compatibility on the Structure and Properties of PLA/Lignin Biocomposites by Chemical Modification

High-Performance Lignocellulosic Self-Bonding Composites via Dialdehyde Modification and Water-Involved Low-Temperature Hot Pressing

Esterification of Lignin Isolated by Deep Eutectic Solvent Using Fatty Acid Chloride, and Its Composite Film with Poly(lactic acid)

Fractionation of technical lignin and its application on the lignin/poly-(butylene adipate-co-terephthalate) bio-composites

Synergistic reinforcement of polylactic acid/wood fiber composites by cellulase and reactive extrusion

Multifunctional lignin-poly (lactic acid) biocomposites for packaging applications

Construction of interfacial dynamic bonds for high performance lignin/polymer biocomposites