Abstract:In this paper, the inorganic–organic composite flocculant (PAC/PMAPTAC) was prepared with polyaluminum chloride (PAC) and the self-made PMAPTAC. Then, the flocculation sedimentation experiment was used to evaluate the flocculation performance of single flocculant PAC, PMAPTAC and the composite flocculant PAC/PMAPTAC in dyeing wastewater. At the same time, the flocculation effect of PAC/PDMDAAC was compared with that of PAC/ PMAPTAC under the same condition. Finally, the flocculation mechanism was analyzed by zeta potential and floc morphology. The results showed that compared with PAC, the flocculation performance of composite flocculant PAC/PMAPTAC could be markedly improved, resulting in the higher decolorization rate and CODMn removal rate. Besides, the increase of (η) or content of PMAPTAC in PAC/PMAPTAC could enhance the decolorization rate and CODMn removal rate simultaneously. Furthermore, the lower dosage was required to achieve the best removal effect, which meant that the cost of the flocculant was reduced. Moreover, the comparison of flocculation performance turned out that the decolorization rate and CODMn removal rate of PAC/PMAPTAC were higher than those of PAC/PDMDAAC under the same condition. Finally, the zeta potential and floc morphology analysis showed that the flocculation mechanism of the reactive dye simulated wastewater was mainly charge neutralization and adsorption bridging. The above results not only fill the gaps in the research of PAC/PMAPTAC during the treatment of dyeing wastewater, but also provide an experimental basis for its application in dyeing wastewater and expand the application fields of PMAPTAC.

Synthesis and flocculation of larch tannin/acrylamide/ dimethyldiallylammonium chloride composite

Synthesis, Characterization and Floculating Properties of Coply(AM-DAC) in Water and Wastewater Treatment

Study on the preparation of amploteric lignin-based flocculant and its flocculation and decolorizing properties

Synthesis, Characterization, and Flocculation Properties of Branched Polyacrylamide

Synthesis, Characterization, and Flocculation Properties of Branched Cationic Polyacrylamide

Synthesis and characterization of a novel terpolymer and the effect of its amphoteric property on the sludge flocculation

Advanced Lignin-Acrylamide Water Treatment Agent by Pulp and Paper Industrial Sludge: Synthesis, Properties and Application

Preparation of Inorganic-organic Composite Flocculant PACSAM and Its Decolorization Capability

Synthesis and Characterization of Composite Flocculant PAFS–CPAM for the Treatment of Textile Dye Wastewater

Preparation of grafted starch‐based cationic flocculants and its removal of reactive and disperse dyes

Preparation of octopus-like lignin-grafted cationic polyacrylamide flocculant and its application for water flocculation

Preparation of a Lignin-Based Cationic Flocculant and Its Application in Kaolin Suspension Treatment

Template Polymerization Of A Novel Cationic Polyacrylamide: Sequence Distribution, Characterization, And Flocculation Performance

Synthesis of the Composite Flocculant of Starch-Graft-Acrylamide with Polyaluminum Chloride

Flocculation performance evaluation and flocculation mechanism study of PAC/PMAPTAC composite flocculant in dyeing wastewater

Preparation of Amphoteric Lignin-base Flocculant LSDC

Enhancement of textile-dyeing sludge dewaterability using a novel cationic polyacrylamide: role of cationic block structures

Synthesis and Application of Poly (Acrylamide and Polyethylene Glycol Methacrylate) Flocculant

Study On The Synthesization Of Inorganic Flocculant And The Decolorization Mechanism For Ctmp Wastewater

One-pot preparation of lignin-based cationic flocculant and its application in dye wastewater

Preparation of starch-based adsorbing-flocculating bifunctional material St-A/F and its removal of active, direct and disperse dyes from textile printing and dyeing wastewater