Abstract:Backgrounds: Exposure to nanoparticles in the workplace is a health concern to occupational workers with increased risk of developing respiratory, cardiovascular, and neurological disorders. Based on animal inhalation study and human lung tumor risk extrapolation, current authoritative recommendations on exposure limits are either on total mass or number concentrations. Effects of particle size distribution and the implication to regional airway dosages are not elaborated. Methods: Real time production of particle concentration and size distribution in the range from 5.52 to 98.2 nm were recorded in a wire-cut electrical discharge machine shop (WEDM) during a typical working day. Under the realistic exposure condition, human inhalation simulations were performed in a physiologically realistic nasal and upper airway replica. The combined experimental and numerical study is the first to establish a realistic exposure condition, and under which, detailed dose metric studies can be performed. In addition to mass concentration guided exposure limit, inhalation risks to nano-pollutant were reexamined accounting for the actual particle size distribution and deposition statistics. Detailed dosimetries of the inhaled nano-pollutants in human nasal and upper airways with respect to particle number, mass and surface area were discussed, and empirical equations were developed. Results: An astonishing enhancement of human airway dosages were detected by current combined experimental and numerical study in the WEDM machine shop. Up to 33 folds in mass, 27 folds in surface area and 8 folds in number dosages were detected during working hours in comparison to the background dosimetry measured at midnight. The real time particle concentration measurement showed substantial emission of nano-pollutants by WEDM machining activity, and the combined experimental and numerical study provided extraordinary details on human inhalation dosimetry. It was found out that human inhalation dosimetry was extremely sensitive to real time particle concentration and size distribution. Averaged particle concentration over 24-h period will inevitably misrepresent the sensible information critical for realistic inhalation risk assessment. Conclusions: Particle size distribution carries very important information in determining human airway dosimetry. A pure number or mass concentration recommendation on the exposure limit at workplace is insufficient. A particle size distribution, together with the deposition equations, is critical to recognize the actual exposure risks. In addition, human airway dosimetry in number, mass and surface area varies significantly. A complete inhalation risk assessment requires the knowledge of toxicity mechanisms in response to each individual metric. Further improvements in these areas are needed.

Distribution Characteristics of Nano-Tio2 Aerosol in the Workplace

Distribution of Nanoparticle Number Concentrations at A Nano-Tio2 Plant

Collection and Characterization of TiO2Nano-aerosol by Wet Method

Exposure Assessment of Workplace Manufacturing Titanium Dioxide Particles

On the Collection and Control of Nano TiO2 Dust Exposure to the Occupational Environment

Collection of Nano-Tio2 Aerosol by Using A Novel Wet Sampler

Effect of Atomized Droplets on Wet Collecting of TiO_2 Nano-particle Aerosols

Submicron Aerosols at Thirteen Diversified Sites in China: Size Distribution, New Particle Formation and Corresponding Contribution to Cloud Condensation Nuclei Production

Influence of Surface Functional Groups on Deposition and Release of TiO 2 Nanoparticles.

Size-resolved Effective Density of Submicron Particles During Autumn in the North China Plain

Analysis of particle size distribution measurements from a summer campaign in suburban Tianjin

A combined experimental and numerical study on upper airway dosimetry of inhaled nanoparticles from an electrical discharge machine shop

Characteristics of Aerosol Particle Size Distributions in Urban Lanzhou, North-Western China

Measurement and Analysis of the Concentration and Size Distribution of Aerosols in a Copper Mine

Design and Evaluation of an Aerosol Nanoparticle Generation System

Exposure Assessment of Nano-Caco3 Manufacturing Workplaces

Characterization of Size, Surface Charge, and Agglomeration State of Nanoparticle Dispersions for Toxicological Studies

Experimental study on aerosol dry deposition characteristics in wind tunnel simulation

Aerosol size distributions in urban Jinan: Seasonal characteristics and variations between weekdays and weekends in a heavily polluted atmosphere

Size Distribution and Source Apportionment of Airborne Metallic Elements in Nanjing, China

Chemical Characteristics of Size-Resolved Aerosols in Winter in Beijing.