Abstract:Undecorated and Pt-decorated SnO2 nanoparticles (NPs) were prepared using sol-gel and hydrothermal methods. The tin dioxide NPs, as sensing materials, were screen printed on alumina substrates with Pt test electrode to fabricate the gas sensors. The characteristics of these gas sensors in terms of composition, morphology, and sensing property were investigated by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), and electrochemical workstation, respectively. The results elucidated that the response time of Pt-decorated SnO2 sensor to 100 ppm H-2 is 29 s at 350 degrees C, which is almost half of that of pure SnO2 gas sensor. Meanwhile, the effect of operating temperature and Pt decorating on the sensing properties and the 'n' value is studied. Comparing with many fabricated H-2 gas sensors, our as-prepared sensor exhibits not only a high response time but also detects H-2 gas down to 0.08 ppm. To the author's best knowledge, the detection limit of 0.08 ppm is the best reported detection limit for the gas sensors based on tin oxide NPs so far. Moreover, there is a significant enhancement in the selectivity of Pt-decorated SnO2 sensor to the H-2 gas against other investigated gases such as carbon monoxide (CO), methane (CH4), nitrogen dioxide (NO2), sulfur dioxide (SO2). Overall, the obtained results clearly demonstrate that the Pt-decorated SnO2 is an excellent sensing material for the fabrication of gas sensors and the detection of trace concentration of H-2 down to 0.08 ppm. Furthermore, the results of statistical and fractal analysis on 2D microstructures of FESEM images showed a coefficient correlation of about 0.991 for all the samples. (C) 2019 Elsevier B.V. All rights reserved.

P-Type Metal Oxide Doped Sno2 Thin Films for H2s Detection

H2S sensing properties of the SnO2-based thin films

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Tin Oxide Thin Films Prepared by Aerosol-Assisted Chemical Vapor Deposition and the Characteristics on Gas Detection

Preparation of PdO-decorated NiO porous film on ceramic substrate for highly selective and sensitive H2S detection

Properties and Mechanism Study of Ag Doped SnO2 Thin Films As H2S Sensors

Aerosol-Assisted Cvd Of Sno2 Thin Films For The Room-Temperature Detection Of Hydrogen Sulfide

SnO2-inserted 2D Layered Ti3C2Tx MXene: from Heterostructure Construction to Ultra-High Sensitivity for Ppb-level H2S Detection

Nanocrystalline In2O3–SnO2 Thick Films for Low-Temperature Hydrogen Sulfide Detection

A SAW-based H2S sensor coated with SnO2 thin film

Development of Sensors Based on CuO-doped SnO2 Hollow Spheres for Ppb Level H2S Gas Sensing

Electroless Plated SnO2–Pd–Au Composite Thin Film for Room Temperature H2 Detection

Sensitive, selective and stable tin dioxide thin-films for carbon monoxide and hydrogen sensing in integrated gas sensor array applications

Properties and mechanism study of SnO2 nanocrystals for H2S thick-film sensors

Nanocrystalline tin oxide thick-film gas sensor for H2S detection

Nanocrystalline SnO 2 film prepared by the aqueous sol–gel method and its application as sensing films of the resistance and SAW H 2 S sensor

High selectivity of sulfur-doped SnO 2 in NO 2 detection at lower operating temperatures.

A Highly Sensitivity and Selectivity Pt-SnO2 Nanoparticles for Sensing Applications at Extremely Low Level Hydrogen Gas Detection

Enhanced H 2 S Gas Sensing Performance of SnO 2 /BaSnO 3 Heterostructures

H2S Detection Sensing Characteristic of CuO/SnO2 Sensor