Abstract:Discrete lateral braces are commonly employed to enhance the out-of-plane stability of arches. However, these braces generate coupling effects among vibration modes, which significantly impact the vibration characteristics of the arches. This paper presents an analytical solution for the free vibration analysis of two-hinged arches with equally-spaced lateral translational and/or rotational braces. A simplified method of evaluating the fundamental frequency for the out-of-plane vibration of arches with equally-spaced lateral braces is introduced. The method relies on the conventional approach of representing arch braces through elastic springs, but here the out-of-plane deflection of the braced arch is constructed by adding related coupled sinusoidal functions to that of the unbraced arch, satisfying both the boundary and kinematic conditions. Subsequently, the fundamental frequency and threshold bracing stiffness or stiffness requirement are derived using the Rayleigh–Ritz method. Finite element analysis (FEA) is applied to investigate the flexural-torsional vibration mode and fundamental frequency of arches with discrete braces, and the results from FEA closely match the theoretical predictions. The effects of number of lateral translational and/or rotational brace, out-of-plane slenderness, included angle, bracing stiffness and bracing position on the fundamental frequency are comprehensively analyzed. It is found that when the fundamental frequency of the braced arch increases due to changes in bracing stiffness, the mode shape displays more intricate behavior, rather than following a straightforward low-to-high mode growth pattern. Furthermore, it is observed that in some cases, the addition of rotational bracing stiffness can markedly enhance the maximum fundamental frequency of the arch with both translational and rotational braces.

Lateral brace arrangement for concrete filled steel tube arch bridge

Lateral brace arrangement for large-span half-through concrete filled steel tube arch bridge

Numerical Analysis of Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges

Case Study on Stability Performance of Asymmetric Steel Arch Bridge with Inclined Arch Ribs

Bracing Systems for Three-Ribbed Arch Bridges Against Out-of-plane Buckling

Optimal Bracing System Design for Funicular Twin Arches Against Out-of-plane Buckling

Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

Parametric Study of In-Plane Ultimate Bearing Capacity of CFST Truss Rib Arch Bridge

Influence of transverse brace arrangement on dynamic characteristics of a half-through CFST arch bridge

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

IN-PLANE ELASTIC BUCKLING OF STEEL CIRCULAR ARCHES WITH HORIZONTAL SPRING SUPPORT

Natural Vibration and Stability of Large-Span Half-Through Concrete Filled Steel Tubular Arch Bridge

Seismic performance assessment and retrofitted by buckling-restrained braces for half-through concrete-filled steel tubular arch bridge with the vertical suspended deck system

Analysis on ultimate load-bearing capacity of large-span half-through CFST arch bridge

Reasonable inclination of large-span half-through CFST arch bridge with inclined ribs

Optimum Design of Large Span Concrete Filled Steel Tubular Arch Bridge Based on Static, Stability and Modal Analysis

Influence of transverse braces arrangement on dynamic characteristics of a half-through CFST arch bridge

Approximate closed-form solutions for free vibration of circular arches with discrete lateral braces

Dynamic Response Analysis of Half-through CFST Arch Bridges Affected by Crossbeams Setting

In-plane nonlinearity stability strength of circular concrete-filled steel tubular arches

Design of CFST East Chaoyang Arch Bridge