Abstract:In this study, the Ba3P2O8 and Mg2B2O5 were fabricated by the solid-state reaction method separately, and the (1x)Ba3P2O8-xMg2B2O5 (x = 0.2-0.4) low-temperature co-fired ceramic (LTCC) materials were obtained in the sintering temperature range of 880-960 degrees C. The phase compositions, microstructures, elemental compositions, and microwave dielectric properties of the (1-x)Ba3P2O8-xMg2B2O5 composite ceramics were investigated by Xray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and TE01 delta mode dielectric resonator method, respectively. The results revealed that the Mg2B2O5 phase and Ba3P2O8 phase could coexist well in the (1-x)Ba3P2O8-xMg2B2O5 composite ceramics without formation of any new phases. The abnormal grain growth of Ba3P2O8 grains was inhibited by the addition of Mg2B2O5. In addition, through composition of Ba3P2O8 and Mg2B2O5, the temperature coefficient of resonant frequency (tau f) and quality factor (Qxf) were effectively optimized, and the sintering temperature was reduced to 880-960 degrees C. The optimal performance of 0.8Ba3P2O8-0.2Mg2B2O5 composite ceramic was achieved at a sintering temperature of 920 degrees C, tau f = -1.9 ppm/degrees C, Qxf = 61,250 GHz, and a low permittivity epsilon r = 10.7. The chemical compatibility test demonstrated that the composite ceramic could coexist well with silver, which indicated that the 0.8Ba3P2O80.2Mg2B2O5 composite ceramic is a candidate LTCC material with wide application prospects.

High Stability Of Dielectric Permittivity For Pb(Mg1/3nb2/3)O-3-Based Composite Ceramics Prepared By Coating Method

High Stability of Dielectric Permittivity for Pb(Mg<sub>1/3</sub>Nb<sub>2/3</sub>)O<sub>3</sub>-Based Composite Ceramics Prepared by Coating Method

Preparation and Temperature Dependence of Electrostriction Properties for PMN-based Composite Ceramics

Optimizing structure and electrical properties of high-Curie temperature PMN-PHT piezoelectric ceramics via tailoring sintering process

Composition Design of PMN-PH-PT Piezoelectric Ceramics for High-Temperature Actuator Applications

Ferroelectric Phase Transition and Electrical Properties of High-Tc PMN-PH-PT Ceramics Prepared by Partial Oxalate Route

Effects of Nano-Sized In2O3on Sintering Behavior and Electrical Properties of 0.28Pb(in1/2nb1/2)o3-0.40Pb(mg1/3< /Sub>nb2/3)o3-0.32Pbtio3ceramics

New dielectric-temperature characteristics of BT and PMN cofired ceramics

Investigation on Microscopic Mechanisms of High-Curie Temperature PMN-PH-PT Piezoelectric Ceramics

Design Morphotropic Phase Boundary Composition in the Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTio3 System and Its Performance

Study on structure and dielectric properties of PbZnNbO based composite ceramics

Pb(Mg 1/3 Nb 2/3 )O 3 -Pbtio 3 -Batio 3 Complex Perovskite Ferroelectric Ceramics with High Dielectric Constant and Low Firing Temperature

Temperature-stable dielectric ceramics in Pb(Mg1/3Nb2/3)O3–CaTiO3–Bi4Ti3O12 pseudo-ternary system

Improved Curie Temperature, Electromechanical Properties and Thermal Stability in ZnO-modified 0.68Pb(mg1/3nb2/3)o-3-0.32pbtio(3) Ceramics with Coexisting Monoclinic and Tetragonal Phases

Low-loss and Temperature Stable (1-X)ba3p2o8-xmg2b2o5 Composite Ceramics with Low Sintering Temperature

Structural and electrical properties investigations of Pb(Mg1/3Nb2/3)O3–PbTiO3–Pb(Fe1/2Nb1/2)O3 ceramics

Effect of Sintering Temperature on the Electric Properties of 0.68Pb(Mg1/3Nb2/3)O3-0.32PbTiO3 Ceramics

Modified Pb(Mg1/3Nb2/3)O3‐PbZrO3–PbTiO3 Ceramics with High Piezoelectricity and Temperature Stability

Dielectric Properties Of Pb(Zn1/3nb2/3)O-3-Batio3-Pbtio3 Ceramics

Phase evolution and strong temperature‐dependent electrostrictive effect in (1−x)Pb(Mg1/3Nb2/3)O3‐xPbTiO3 solid solutions

Effect of Pb(Fe1/2Nb1/2)O3 modification on dielectric and piezoelectric properties of Pb(Mg1/3Nb2/3)O3–PbZr0.52Ti0.48O3 ceramics