Abstract:This paper presents the experimental methods and findings in obtaining the strain behavior of mortar during freezing and thawing cycles (FTC) at the meso-scale under fully saturated condition and the coefficient of thermal expansion (CTE) and elastic modulus of mortar after FTC tests. A heat-cool cycle test comparing an oven-dried and undried mortar was also performed prior to the FTC test, confirming that oven drying at 105 degrees C does not affect the CTE of samples, thereby ensuring the reliability of the results. During FTC with constant moisture content, a limitation in the increase in tensile strain was observed and this tensile strain decreased until contraction was observed. The contraction is attributed to the removal of gel pore water arising from negative pressures. Due primarily to the absence of available water supply, the displaced pore water cannot be refilled, which results in contraction at the end of the FTC. More importantly, the results show that after FTC, the CTE of frost damaged mortar increases while its elastic modulus decreases, primarily owing to microcracking when frost damage sets in. Microcracks act as broken bridges that can detach the aggregate from the hardened cement paste and in effect reduces the thermal restraints that each part (fine aggregate and cement paste) exerts on the other. The hardened cement paste can then expand/contract more freely under temperature variation, and thus can significantly affect (increase) the CTE of the whole composite (mortar). Further, stress transfer in the material is prevented due to microcracking resulting in elastic modulus reduction.

Study on the Temperature-Sensitive Properties of Carbon Fiber-Reinforced Mortar

Studies on the Thermoelectric Property of Cement Mortar with Carbon Fiber and Micro Steel Fiber

Temperature-resistivity Dependence of Carbon Fiber Reinforced Cement Based Composites

FRP Confined Smart Concrete/mortar

Characteristics of Resistivity-Temperature for Carbon Fiber Reinforced Concrete

Influence of Cementitious Material Infiltration on Piezoresistive Effect of Carbon Fiber Bundle

Temperature and humidity variation of specific resistance of carbon fiber reinforced cement

Investigation on the influence of fine steel fiber and carbon fiber on the thermo-mechanical properties of cement-based thermal energy storage mortar

Smart Behavior of Carbon Fiber Reinforced Cement-based Composite

Experimental study on effect of temperature and moisture on piezoresistive effect of carbon nanotube concrete

Study on Shear Behavior of Concrete-polymer Cement Mortar at Elevated Temperature

Change of the Coefficient of Thermal Expansion of Mortar Due to Damage by Freeze Thaw Cycles

Investigation on Concrete-Pcm Interface under Elevated Temperature: at Material Level and Member Level

Remarkable Temperature Sensitivity of Partially Carbonized Carbon Fibers with Different Microstructures and Compositions

Preparation and Piezoresistive Properties of Carbon Fiber-Reinforced Alkali-Activated Fly Ash/slag Mortar

Effect of Multiwalled Carbon Nanotube Size on Electrical Properties of Cement Mortar Composites

Investigation on physicochemical and piezoresistive properties of smart MWCNT/cementitious composite exposed to elevated temperatures

Anisotropic electrical and piezoresistive sensing properties of cement-based sensors with aligned carbon fibers

Potential temperature sensing of oriented carbon-fiber filled composite and its resistance memory effect

Carbon fiber reinforced cement and its stress sensor

Reinforcement Effect and Mechanism of Carbon Fibers to Mechanical and Electrically Conductive Properties of Cement-Based Materials