Abstract:Combining the first-order ordinary differential equations of pump and laser power and the second-order ordinary differential equation of temperature, an optical model for diode-pumped alkali vapor lasers in two pumped configurations, is reported. This model, taking into account the axial distributions of pump and laser beam radii and the radial distributions of intensities and temperature, shows good agreement between the calculated and experimental results. An observed maximum temperature rise of similar to 58 K corresponding to a pump power of 20 W is reproduced, and a wide region of heat source density of quenching is predicted by the model. The heat production of relaxation and of quenching are demonstrated to be within an order of magnitude, indicating that quenching is as important as relaxation in the temperature calculation. It can also be deduced that the peak of the temperature profile is mainly dominated by relaxation, whereas its width can be attributed to thermal diffusion and quenching. In addition, dependencies of laser and thermal power on the pump beam waist are calculated, and an optimal ratio of 0.7 between the pump and laser beam waist is obtained.

Distributed-Side-Pumped Slab Lasers: Theoretical Design and Modeling

Modeling of Distributed-Side-pumped Slab Lasers: Power Scaling by Adding Slab Units

Three-Dimensional Kinetic and Fluid Dynamic Modeling and Three Iterative Algorithms for Side-Pumped Alkali Vapor Lasers

Theoretical Analysis of the Semi-Ring and Trapezoid LD Side-Pumped Alkali Vapor Lasers

Modeling of Kinetic and Thermodynamic Processes in a Flowing Exciplex Pumped Alkali Vapor Laser

Modeling of a Diode Four-Side Pumped Cesium Vapor Laser Amplifier with Flowing Medium

Modeling of a Diode Side Pumped Cesium Vapor Laser MOPA System

Thermal Effects of High-Power Side-Pumped Alkali Vapor Lasers and the Compensation Method

Modeling of Steady-State Temperature Distribution in Diode-Pumped Alkali Vapor Lasers: Analysis of the Experimental Results

Single-Side-Pumped Slab Laser Amplifier Chain: Design and Numerical Modeling

Modeling of the Static and Flowing-Gas Ring-Ld Side-Pumped Alkali Vapor Amplifiers

Modeling of a diode four-side symmetrically pumped alkali vapor amplifier.

Theoretical Investigation on Exciplex Pumped Alkali Vapor Lasers with Sonic-Level Gas Flow

Theoretical Design and Experimental Research on High Power Yb∶ YAG Ceramic Slab Laser Amplifier

Design and Modeling of 10-Kw Level Single-Side-pumped Slab Laser Amplifier Chain

Thermal Effects in High-Power Double Diode-End-Pumped Cs Vapor Lasers

Modeling of Pulsed Cs Vapor Lasers in Transversely Pumped Configuration

Analysis of the pump-beam path in a corner-pumped slab laser

A novel compact side-pumped bonded slab microchip laser

Optimizing the composite slab sizes in corner-pumped lasers

Theoretical and Experimental Investigations of Quasi-Continuous Wave Diode Array Side-Pumped Yb:YAG Slab Laser