Abstract:The phase transformation behavior and microstructural evolution of the Ti-19.5Zr-10Nb-0.5Fe alloy upon heating and cooling have been investigated by X-ray diffraction spectroscopy, differential scanning calorimetry, thermal dilatation and transmission electron microscopy. The results show that the Ti-19.5Zr-10Nb-0.5Fe alloy is mainly composed of the orthorhombic α″-martensite phase as well as a small amount of β-phase at room temperature. The reverse transformation of the α″-martensite phase to the β-phase occurs at 429K and finishes at 449K. The nanoscale hexagonal ω-phase particles continuously precipitate at approximately 533K and co-exist with the β-phase even up to 593K. When heated to 683K, the acicular α-phases nucleate at the interfaces between the coarsened ω-phase precipitate and β-phase, and then grow up at the expense of the ω-phase and β-phase with the increasing temperature up to 773K. The fraction of α-phase decreases during the subsequent heating, leaving the β-phase exclusively remained at 873K. Upon cooling from 873K, the β-phase partially transforms into the α″-martensite phase. The measurements of the microhardness indicate the hardening effect of the ω-phase precipitate and accord with the phase evolution behavior in the Ti-19.5Zr-10Nb-0.5Fe alloy.

Influence of Nb Addition on Phase Transformation of Tinife Shape Memory Alloy

Microstructure and Transformation Behavior of TiNiFeNb Shape Memory Alloys

Phase Transformation and Microstructure of Ti50Ni48-xFe2Ndx Shape Memory Alloys

Phase transformation behaviors and shape memory effects of TiNiFeAl shape memory alloys

Influence of Nb Content on Martensitic Transformation and Mechanical Properties of Tinicunb Shape Memory Alloys

Mechanical Properties And Shape Memory Effects Of Tininb Shape Memory Alloys With Low Niobium Content

Influence of Fe Addition on Phase Transformation Temperatures and Mechanical Properties of TiNi Shape Memory Alloys

Investigation on Microstructure and Phase Transformation of La Added Ti49.3ni50.7 Shape Memory Alloy

Investigation on Microstructure and Phase Transformation of La Added Ti<sub>49.3</sub>Ni<sub>50.7</sub> Shape Memory Alloy

Effect of the Ti content on microstructure and properties of Ni53Mn23.5Ga23.5-xTix ferromagnetic shape memory alloy

Effects of Composition on Transformation Characteristics and Shape Memory Effect of Ti-Ni-Nb Alloys

Effect of Nb-Content on Mechanical Properties of (Ni<sub>47</sub>Ti<sub>44</sub>)<sub>100-x</sub>Nb<sub>x</sub> Shape Memory Alloys

Effect Of Nd Addition On The Microstructure And Martensitic Transformation Of Ni-Ti Shape Memory Alloys

Microstructure and transformation behavior of Ni-Ti-Nb shape memory alloys with low Nb content

Phase Transformation Behavior and Mechanical Properties of Ti50Ni49−x Fe1Co X Shape Memory Alloys

Effect of Nb Addition on the Microstructure and Martensitic Transformation of NiTiHfScNb High Temperature Shape Memory Alloys

Influence of Nb addition and process parameters on the microstructure and phase transformation behavior of NiTiNb ternary shape memory alloys fabricated by laser powder bed fusion

A Study on TiNi(Fe,Mo) Shape Memory Alloy

The Influence of Co Addition on Phase Transformation Behavior and Mechanical Properties of TiNi Alloys

Phase transformations and microstructural evolution in Ti-19.5Zr-10Nb-0.5Fe shape memory alloys

Phase Transformations And Mechanical Properties Of Nitial Shape Memory Alloys With Equal Ni/Ti Atom Ratio