Abstract:Great progress has been carried out on the Micro Total Analysis System (μTAS) in recent years, in which the chemical analysis system is miniaturized by micromachining. This system can reduce reagent consumption, dispersion effects and analysis time. Nowadays, μTAS devices are beginning to make significant contributions to biotechnology, biomedicine and drug discovery. Meanwhile, due to the difficulties of controlling fluid motion in such a small scale, fluid flow driven in microfluidic devices has received increasing attention. So far electroosmotic flow (EOF) is one of the most popular and important fluid driven techniques in microfluidic devices because in an EOF the velocity profile is plug-like and the mean velocity is independent of the cross-sectional area, as well as its valveless control of fluid flow. Therefore, electro-osmotic flow can offer significantly less deleterious dispersive effects than pressure-driven flow and provide a favored high-performance sample separation technique. Due to its importance, electroosmotic flow in microchannels has received considerable attentions recently and been investigated both numerically and experimentally. However, fluid flow in microfluidic devices is often through channels with changes in cross-sectional area, and/or channels with bends and bifurcations, which make a great difference to velocity profile, pressure distribution and so on. A systematic study of these different configurations will provide valuable insight into the flow physics. The goal of the present study is to undertake a numerical study of EOF in microchannels with a sudden expansion in order to identify the factors affecting the flow. The present work is in the use of an incompressible lattice-Boltzmann model with a forcing term which is perhaps better suited to microflows than the conventional Navier-Stokes solvers. The impact of expansion ratio (ER), ionic molar concentration (c ∞), external electric potential and zeta potential on the flows are investigated. Numerical results including velocity profile, pressure distribution and external electrical potential distribution have been presented. It has been shown that boundary layer separation has been suppressed by the electroosmotic force exerted on the fluid near walls. Moreover, a sudden change in the channel has a great influence on the electroosmotic flows. A jump has been found in fluid velocity, pressure drop at the junction, as well as electrical potential due to EDL. The external electrical potential is linear along the axis of the channel but a turning point emerges at the junction. Non-linear pressure drop in the narrow channel becomes more obvious as ER increases. Results also show that velocity profile at the outlet depends on ER and c ∞. The convex velocity profile turns to concave one as ER or c ∞ increases, resulted from interactions between adverse pressure gradient and electric force exerted on the fluid in the middle of channel.

Analytical Solution of Mixed Electroosmotic and Pressure-Driven Flow in Rectangular Microchannels

LATTICE BOLTZMANN SIMULATION OF ELECTROOSMOTIC FLOWS IN MICROCHANNEL WITH A SUDDEN EXPANSION

Analysis of Combined Electroosmotic and Pressure Driven Flow of Multilayer Immiscible Fluids in a Narrow Capillary

Modeling Electrokinetic Flows in Microchannels Using Coupled Lattice Boltzmann Methods

Theoretical Investigation of Two-Fluid Electroosmotic Flow in Microchannels

Characterization of Electroosmotic Flow in Microchannels.

Diffusioosmotic flow in rectangular microchannels

A Mathematical Model of Mixing Enhancement in Microfluidic Channel with a Constriction under Periodic Electro-Osmotic Flow

Laminar Flow of Micropolar Fluid in Rectangular Microchannels

Exact solution of electroosmotic flow of the second grade fluid in a circular microchannel driving by an AC electric field

Numerical Simulation Of Sample Diffusion In Electroosmotic Rectangular Microchannel Flows

Analytical Solution of Time-Periodic Electroosmotic Flow through Cylindrical Microchannel with Non-Uniform Surface Potential

Analysis of streaming potential flow and electroviscous effect in a shear-driven charged slit microchannel

Analysis of electro-osmotic flow in a microchannel with undulated surfaces

Dynamic Electroosmotic Flows of Power-Law Fluids in Rectangular Microchannels

SIMULATION AND MICRO-PIV RESEARCH ON CLASSICAL MICROCHANNEL FLOW

An Exact Solution for Power-Law Fluids in a Slit Microchannel with Different Zeta Potentials under Electroosmotic Forces

Combined Electroosmotic And Pressure Driven Flow In Tree-Like Microchannel Network

Simulation of gas flow and heat transfer in micro Poiseuille flow

Factors That May Influence Apnea-Hypopnea Index in Patients With Acute Myocardial Infarction

Analysis of electroosmotic flow of power-law fluids in a slit microchannel