Abstract:Cell separation has become @important in biological and medical applications. Dielectrophoresis (DEP) is widely used due to the advantages it offers, such as the lack of a requirement for biological markers and the fact that it involves no damage to cells or particles. This study aimed to report a novel approach combining 3D sidewall electrodes and contraction/expansion (CEA) structures to separate three kinds of particles with different sizes or dielectric properties continuously. The separation was achieved through the interaction between electrophoretic forces and inertia forces. The CEA channel was capable of sorting particles with different sizes due to inertial forces, and also enhanced the nonuniformity of the electric field. The 3D electrodes generated a non-uniform electric field at the same height as the channels, which increased the action range of the DEP force. Finite element simulations using the commercial software, COMSOL Multiphysics 5.4, were performed to determine the flow field distributions, electric field distributions, and particle trajectories. The separation experiments were assessed by separating 4 μm polystyrene (PS) particles from 20 μm PS particles at different flow rates by experiencing positive and negative DEP. Subsequently, the sorting performances of the 4 μm PS particles, 20 μm PS particles, and 4 μm silica particles with different solution conductivities were observed. Both the numerical simulations and the practical particle separation displayed high separating efficiency (separation of 4 μm PS particles, 94.2%; separation of 20 μm PS particles, 92.1%; separation of 4 μm Silica particles, 95.3%). The proposed approach is expected to open a new approach to cell sorting and separating.

Dielectrophoresis of Electroless Gold Plating Polystyrene Microspheres

Microwire Formation Based on Dielectrophoresis of Electroless Gold Plated Polystyrene Microspheres

Manipulation of Gold Coated Microspheres Using Electrorotation

Alternating Current Electrokinetic Properties of Gold-Coated Microspheres.

High Specific Surface Gold Electrode on Polystyrene Substrate: Characterization and Application As DNA Biosensor.

Fabrication of gold microelectrodes on polystyrene sheets by UV-directed electroless plating and its application in electrochemical detection

Facile Preparation of Ordered Arrays of Polystyrene Spheres Dissymmetrically Decorated with Gold Nanoparticles at Air/liquid Interface and Their SERS Properties

Synthesis of Monodisperse Metal-coated Polystyrene Conductive Microspheres with Ultrasonic Assisted

Electrorotation of metallic microspheres

Dielectrophoresis-enabled surface enhanced Raman scattering on gold-decorated polystyrene microparticle in micro-optofluidic devices for high-sensitive detection

Continuous Dielectrophoretic Particle Separation Using A Microfluidic Device with 3d Electrodes and Vaulted Obstacles

Microparticles Manipulation Based on Dielectrophoresis in Microsystem

Micro-particle Manipulation Based on Optically-induced Dielectrophoresis

Preparation of polystyrene@Ni@Cu core–shell microspheres by pickering emulsion polymerization and their autonomous motion in a magnetic field applied to anisotropic conductive films

Continuous Particle Separation Driven by 3D Ag-PDMS Electrodes with Dielectric Electrophoretic Force Coupled with Inertia Force

Hollow spheres of silver synthesized using polyelectrolyte capsules as microreactors

Effective Cell and Particle Sorting and Separation in Screen-Printed Continuous-Flow Microfluidic Devices with 3d Sidewall Electrodes

The Use of Poly(dimethylsiloxane) Surface Modification with Gold Nanoparticles for the Microchip Electrophoresis.

Dielectrophoresis: Measurement technologies and auxiliary sensing applications

Preparation and characterization of magnetic microspheres coated with copolymers of two unsaturated monoesters of poly(ethylene glycol)

Beyond two dimensions: Exploring 3D dielectrophoresis for microparticle control using carbon electrodes