Abstract:As the construction and modernization of global navigation satellite systems (GNSS), in the near future, the four main navigation systems (GPS, BDS, GLONASS and GALILEO) as well as some regional systems such as QZSS and IRNSS will broadcast many signals in different frequency. Some of the signals may need further adjustment. In interim, the traditional hardware GNSS receivers which have high integration density and low flexibility are not suited for signals monitoring especially for those new signals.In order to meet the requirement of monitoring GNSS signals as well as the joint processing of them, a high-flexibility multi-system full-band real-time GNSS software receiver is developed. In addition to a wideband antenna, a RF front-end and a data acquisition card to fulfill down-conversion and AD conversion, the rest of receiver are implemented in an ordinary PC with a GPU. With efficient acquisition and tracking methods, the proposal receiver can process all of the civil signals from four main GNSS and some of the regional systems in real-time, including GPS L1C/A, L2C, L5, L1C, BDS B1, B2, GLONASS Gl, G2, GALILEO ElOS, E5a, E5b, QZSS L1C/A, L2C, L5, and L1C signals. Based on the software architecture, the receiver can provide PVT results, measurement results, and many intermediate data such as correlator outputs and raw bit stream which are necessary for signals monitoring and performance analysis. Meanwhile, the strong flexibility of this receiver makes it easy to expansion and update in the future. The GLONASS modernized signals as well as BDS Phase III signals can be quickly added to current receiver after the release of their interface control document (ICD).By using the proposed software receiver, this paper presents the real-time tracking states of all civil signals, the positioning results of each navigation signal, and the monitoring results of viable GNSS satellites. Finally, since the receiver can handle all the civil GNSS signals in real-time and has a flexible structure, it can be used as a dedicated development platform for various types of navigation research.

Intelligent tracking state estimation technology for new generation GNSS receivers

A Robust Position Estimation Algorithm for Low-Cost INS/GPS Integrated Navigation System

Adaptive Kalman tracking algorithm for new generation GNSS signals

Ins/Gps Integrated System State Estimation Based On Hopfield Neural Network

Low Power Tracking of Gnss Signal by Imu Aided Intermittent Tracking Algorithm

Implementation and Performance Assessment of A Vector Tracking Method Based on A Software Gps Receiver

A Parameter Self-Calibration Method for GNSS/INS Deeply Coupled Navigation Systems in Highly Dynamic Environments

Implementation of A Gnss Receiver with an Unambiguous Acquisition and Tracking Technique

Starx A Gpu Based Multi-System Full-Band Real-Time Gnss Software Receiver

An Adaptive Low-Cost INS/GNSS Tightly-Coupled Integration Architecture Based on Redundant Measurement Noise Covariance Estimation

An Improved Relative GNSS Tracking Method Utilizing Single Frequency Receivers

Exploiting On-Orbit Characteristics for Joint Parameter and Channel Tracking in LEO Satellite Communications

Vector Tracking Loops in GNSS Receivers for Dynamic Weak Signals

Review on Vector Tracking Application to GNSS Receiver

Research and Realization of Key Technology of GNSS Software Receiver

Implement and Experiment of GNSS Receiver Software

FFT Tracking Based High Dynamic GPS/INS Scalar Deeply Integrated Navigation Algorithm

Evaluation on Low-cost GNSS/IMU/Vision Integration System in GNSS-denied Environments.

Dual Update-Rate Carrier Tracking Technique for New Generation Global Navigation Satellite System Signals in Dynamic Environments

Robust state and protection-level estimation within tightly coupled GNSS/INS navigation system

Continuous and Precise Positioning in Urban Environments by Tightly Coupled Integration of GNSS, INS and Vision