Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. Virtual track train (VTT) is a new urban public transportation system that adopts rubber wheel and rail transit management mode. Its characteristics of all-wheel-driving all-axle-steering (AWDAAS) enable this multi-articulated vehicle to run along the target path (virtual track) with high precision. This paper proposes a new traction guidance cooperative control strategy aiming at path-tracking and hinge forces optimisation. Firstly, the vehicle dynamics model is established using the two-step method, which mainly includes the centre of gravity (CG) forces model between the wheel steering angles, torques and the generalised forces at every unit. Secondly, the vehicle multi-body dynamics model is built with the CG generalised forces as the control input and carries on the concrete modelling for the three-unit six-axle AWDAAS-VTT. This modelling method can satisfy the rapid expansion and reconstruction according to the different marshalling numbers and axles. Then the hinge forces are analysed and expressed quantitatively by vehicle state and control inputs. A traction guidance cooperative control strategy based on a hierarchical framework is proposed, which has mainly three parts: the cooperative distribution of path-tracking and longitudinal speed targets, the CG generalised forces calculation of every unit based on improved model predictive control (MPC) and Stanley algorithm, and the control allocation (CA) of wheel torque and angle. The control strategy is verified by Co-simulation. The results show that the proposed control strategy can achieve excellent tracking accuracy and effectively reduce hinge forces. In addition, the vehicle under cooperative control also has excellent curve passing stability and continuous curve adaptability. The control strategy has high robustness under different running speeds, curve radii and payloads. Even under the extreme condition of passing through the R20 m curve at 14 m/s, the maximum tracking error is less than 0.035 m.

Study on Optimization of Prospective Track Tension for Reconfigurable Stair-Negotiation Wheelchair

Track Tension Optimization for Stair-Climbing of a Wheelchair Robot with Variable Geometry Single Tracked Mechanism

Design and Analysis of Folding Mechanism for Intelligent Wheelchair-Stretcher Robot

The Static Analysis of Reconfigurable Wheel-Track Transformation Mechanism

Design and Optimization of a Reconfigurable Wheel-Tracked Mobile Robot

Wheelchair design with variable posture adjustment and obstacle-overcoming ability

Design and Variable Parameter Control Strategy of Weight Support Gait Training Robot.

Mechanics analysis of a wheelchair robot with wheel-track coupling mechanism

Development and Experimental Study of Multi-Motion Model Robot with Wheel-Track Compound Structure

Simulation and experimental study on the stability and comfortability of the wheelchair human system under uneven pavement

Dynamics and Stability Analysis on Stairs Climbing of Wheel–track Mobile Robot

Novel design of a wheelchair with stair climbing capabilities

Research on a kind of leg-wheel stair-climbing wheelchair

A Fuzzy-Model-Based Gravity Center Adjustment and Inclination Control for Stair-Climbing Wheelchair

Design and kinematics analysis of coordinated variable wheel-track walking mechanism

Mechanism Design and Mechanical Analysis of Reconfigurable Wheel-track Wheel Based on Offset Guide Rod Mechanisms

Total structure and dynamic simulation of the stair lift

Optimal Design of a Stair-Climbing Mobile Robot with Flip Mechanism.

Research on traction guidance cooperative control of virtual track train based on path-tracking and articulation hinge forces optimisation

Analysis, Design, and Experimental Research of a Novel Wheelchair-Stretcher Assistive Robot

Suspension Design and Posture Control for a Novel By-Wire Chassis Based on Integrated Electric Wheel Module