Abstract:Many subsea structures have non-uniform geometries, which extend only a finite distance above the seabed. To better understand local scour at these structures, this paper presents scour measurements from an experimental study of submerged compound piles comprised of a circular superstructure supported by a circular foundation. The experiments were conducted in the clear-water regime and considered the effect of three different ratios describing the structural geometry: (i) the overall height of the compound structure above the initial bed level to the diameter of the super-structure <math>h1/D1</math>; (ii) the height of the foundation exposed above the initial bed level relative to the overall height of the superstructure <math>h2/h1</math>; and (iii) the diameter of the foundation to that of the superstructure <math>D2/D1</math>. In all cases <math>D2≥D1</math> and <math>h1≥h2≥0</math> (i.e. the foundation and superstructure where never buried). The experimental results indicate that, if all other parameters are held constant, the non-dimensional equilibrium scour depth <math>S0/D2</math> increases with both <math>h1/D1</math> and <math>h2/h1</math>, and decreases as <math>D2/D1</math> increases. To quantitatively explain these trends the experimental results are compared with a range of existing methods to predict scour depth for non-uniform (or complex) surface piercing piles. Of these methods it is found that an effective pile height and an effective pile diameter, computed using simple geometric arguments, give good agreement. The concept of effective height is also shown to collapse time-scale measurements of the scour process convincingly across the full range of experimental results and to explain the extent and shape of the local scour hole reasonably well. Collectively, these findings suggest that the calculation of an effective height may be used to provide a reasonable first approximation to estimate the rate and extent of local scour around submerged compound structures.

Long-Wave Scattering by a Vertical Cylinder with Idealized Scour Pit

An Analytic Solution for Combined Wave Diffraction and Refraction Around a Vertical Cylinder with Idealized Scour Pit

Scattering of Elastic Wave by A Partially Sealed Cylindrical Shell Embedded in Poroelastic Medium

Analytical study on long wave refraction over a dredge excavation pit

Effect of Inclination Angles on the Local Scour Around a Submerged Cylinder

Scattering of Elastic Wave by Circular Lining in Nearly Saturated Soil

3D Numerical Modeling of Flow and Scour Around a Circular Pile

Scour characteristics at the periphery of a vertical pile under steady flow

Wave scattering by porous cylinders with inner columns near a vertical wall

Analytical solution for the short-crested wave diffraction by an elliptical cylinder

Physics of Flow and Local Scour Depth Around Spur Dikes

Scattering of Obliquely Incident Fast Longitudinal Waves Around a Cylinder in Saturated Soil

Experimental Investigation on Scour Development and Scour Protection for Offshore Converter Platform

Oblique wave scattering by porous breakwaters/seawalls: Novel analytical solutions based on contour integral without finding complex roots

Analytic Solution of Long Wave Propagation over a Submerged Hump

Wave scattering by a circular cylinder over a porous bed

Scattering and Refracting of Plane Strain Wave by a Cylindrical Inclusion in Fluid-Saturated Soils

Experimental study of local scour around submerged compound piles in steady current

Influence of Scour Development on Turbulent Flow Field in Front of a Bridge Pier

Numerical simulation of local scour around bridge piers using novel inlet turbulent boundary conditions

Scour around twin-piles under combined wave–current flows