Abstract:Geometric complexities and multi-physical phenomena add difficulties for predicting the thermal field and hence thermal management of an electric motor. A numerical design model that combined electromagnetic and thermal-fluid analysis was proposed for disclosing the detailed temperature distributions of each component in an electric motor. The thermal fluid analysis implemented ANSYS-Fluent code to unravel the thermal field of the interior permanent magnet synchronous electric motor fitted with a smooth or novel spirally twisted channel in the cooling water jacket of a stator with and without shaft cooling. In accordance with the thermal powers converted from the various electromagnetic losses of the electric motor, the complex heat conduction model with realistic thermal boundary conditions was formulated. Initially, the turbulent flow structures and channel averaged Nusselt numbers of the spiral channels without and with the sectional twist were comparatively examined for acquiring the convective thermal boundary conditions in the water jacket. With the high thermal conductivity of the aluminum water jacket, the heat-transfer improvements from the smooth-spiral-channel conditions by using the twisted spiral channel were effective for reducing the average temperatures by about 10% but less effective for altering the characteristic thermal field in the water jacket. At 1290 < Dn < 6455 or 5000 < Re < 25,000 for the spiral channel flows, the channel average Nusselt numbers ratios between the smooth and twisted spiral channels were elevated to 1.18–1.09 but decreased with the increase of Dn or Re. A set of heat-transfer correlations for estimating the Nusselt numbers of Taylor flow in the rotor-to-stator air gap was newly devised from the data available in the literature. While the cooling effectiveness of the water jacket and shaft was boosted by the sectional twists along the spiral channel of the water jacket, the presence of Taylor flow in the annual air gap prohibited the effective rotor-to-stator heat transmission, leading to hot spots in the rotor. By way of airflow cooling through the rotating hollow shaft, the high temperatures in the rotor were considerably moderated. As the development of Taylor flow between the rotor and stator was inevitable, the development of active or passive rotor cooling schemes was necessary for extending the power density of an electric motor. Unlike the previous thermal circuit or lumped-parameter thermal model that predicted the overall temperatures of motor components, the present coupled electromagnetic and thermal-fluid model can reveal the detailed temperature distributions in an electric motor to probe the local hot spots of each component in order to avoid overheating at the early design stage.

Thermal analysis of high speed motor based on flow field calculation considering tooth-slots effects

Water Cooling System Design and Thermal Analysis for Electrical Vehicle Driving Motors

Calculation of 3D Fluid Fields in the Stator-rotor Narrow Gap of the High Speed Permanent Magnet Motor

Optimization of Motor Heat Dissipation Systems Based on Three Dimensional Flow Field Analysis

Analysis of Axial Windage Loss in Air Gap of High-Speed Motors under High Taylor Number

Numerical Simulation on the Flow and Temperature Field in the High-Power Motor

Thermal analysis of a fluid immersed brushless DC motor for aerospace applications

The Influence of Loss Distribution on the Temperature Field of High-Speed Induction Motor

Analysis of Fluid-Thermal Coupling in Ferrofluid Bearing Used in High Speed Machines

Flow and heat transfer characteristics of high-pressure natural gas in the gaps of high-speed motors with a high radius ratio

Loss Calculation and Thermal Analysis of High-speed Magnetic Suspension Amorphous Motor

Multi-field Coupling Finite-Element Analysis of the Temperature Rise in Permanent Magnet Synchronous Motor Applied for High Speed Train

Heat Transfer and Thermal Management of Interior Permanent Magnet Synchronous Electric Motor

Rotor Air-Friction Loss and Thermal Analysis of IPM Rotors for High Speed Axial-Flux Machine

Analysis Of The 3d Steady Temperature Field Of Mw High Speed Permanent Magnet Motor

Research Progress of Enhanced Thermal Evacuation and Cooling Technology for High-Speed Motors

Investigation on Air-Gap Friction Loss Within Built-In Motor for High Speed Motorized Spindle

Calculation and Experimental Study on Temperature Rise of a High OverLoad Tubular Permanent Magnet Linear Motor

Temperature Rise Calculation of the High Speed Magnetic Suspension Motor Based on Bidirectional Electromagnetic–Thermal–Fluid Coupling Analysis

Temperature Field Accurate Modeling and Cooling Performance Evaluation of Direct-Drive Outer-Rotor Air-Cooling In-Wheel Motor

Calculation and Analysis of Thermal Field for the Flat Linear Motor