Abstract:For electric vehicles (EVs), permanent magnet synchronous motors (PMSMs) are competitive owing to their high power factor, high efficiency and high power density. In this paper, four types of PMSMs with different rotor topologies are designed with the same motor main dimensions and the same amount of permanent magnet usage. First, the different PMSMs are compared in terms of their torque characteristics. The torque characteristic curves of the four motors are displayed with the control method i(d)=0 for surface-mounted PMSM (SPMSM) and Maximum Torque per Ampere (MTPA) for interior PMSM (IPMSM). It turns out that IPMSM has higher starting torque than SPMSM due to the reluctance torque. Among the three IPMSMs with different rotor structures, V-shape IPMSM and delta-shape IPMSM can provide higher output torque under the same current supply with the higher salient rate. More information on the no-load magnetic density, torque ripple, efficiency and demagnetization problem operated at the peak current is also provided and compared. Then the four PMSMs with the same peak current are further analyzed and compared on the flux-weakening speed-enlarge (FWSE) capability. The results show good FWSE capability for all of the four PMSMs owing to the large peak current. However, the torque of SPMSM in flux-weakening control region is slightly higher than the IPMSMs.

A Comparative Analysis of Two Types of Rotor Structures for Low-Speed Permanent Magnet Synchronous Generator

Comparison of Dual-Stator Permanent Magnet Machines with Different Rotor Topologies

Comparative Study of Novel Doubly Fed Doubly Salient PM Machines with Different Stator/Rotor-Pole Number Combinations

Comparative Analysis of Unbalanced Magnetic Force in Fractional-Slot Permanent Magnet Machines Having External Rotor Topologies

Comparison Of Axial Flux Pm Synchronous Motor And Induction Motor By Mathematical And Finite Element Analysis

The Electromagnetic Field Analysis of Permanent Magnet Synchronous Generator Based on ANSYS

Optimization Design of a Permanent Magnet Synchronous Generator for a Potential Energy Recovery System

Comparison of Electromagnetic Performance of Superconducting Permanent Magnet Wind Power Generator with Different Topologies

Comparative Investigation Of Single-Sided And Double-Sided Permanent Magnet Linear Motor

Comparative Analysis of Doubly Fed Flux-Reversal Permanent Magnet Machines with Different PM Arrangements and Consequent-Pole Topologies

Vibration Analysis and Comparison of Low-Speed Outer Rotor Permanent Magnet Synchronous Machines

Comparison of PMSMs with Different Rotor Structures for EV Application

Design Optimization with Outer Rotor Interior Permanent Magnet Synchronous Motor with Hybird Permanent Magnet

Comparative Study Between Doubly Salient PM Machine with New Stator/Rotor-Pole Number Combination and Biased Flux PM Machine

A Comparative Study on Two Outer Rotor PMSMs for In-Wheel Direct Drive under Short-Circuit Faults

Comparative Analysis of Double Flux Modulation Permanent Magnet Machines With Different Stator PM Arrangements

Design and Analysis of Outer Rotor Permanent-Magnet Vernier Machines with Overhang Structure for In-Wheel Direct-Drive Application

Performance Comparison and Optimization of a PMSM Based on Hybrid-Type Permanent Magnet with Two Kinds of Rotor Topology

Optimization and Analysis of New Permanent Magnet Synchronous Motor Used in Traction

Comparative Study on Permanent Magnet Synchronous Generator Systems with Various Power Conversion Topologies

Analysis and Comparison of Permanent Magnet Synchronous Motors According to Rotor Type under the Same Design Specifications