Microstructure and mechanical properties of laser beam welded T joint aluminum alloys

Hongbing Liu,Jie Chen,Xiaohong Zhan,Hao Li,Yanbin Chen

2011-01-01

Abstract:Fabricating the fuselage panels of aircraft structures with the laser beam welding (LBW) technique possesses the advantages of weight reduction and high production rate than the traditional riveting techniques. Besides, the welded joints with this technique present higher resistance against corrosion and improved behavior under fatigue than riveting joints. 6xxx (Al-Mg-Si) alloy is an age hardenable alloy possessing enhanced strength due to the precipitation of Mg 2Si phase upon solutionizing and artificial aging. Alloys of this class are extensively employed in aircraft applications. The main goal of this research is to evaluate the relationship between the microstructure and the mechanical properties of the 6xxx alloys T joint laser welds. 2 mm thick AA6056 alloys were T-jointed by laser beam welding using a CO 2 laser with a maximum power of 3 kW. The two weld seams with AA4047 filler material between the stringer and the fuselage skin were welded from the two sides of the stringer in sequence. The microstructure and the tensile properties of the welded joints are studied by means of optical and electronic microscope, and tensile testing. The quality of the T-joint laser welds is good, since no obvious defects are present. Microstructure observations of the joints show that there are three distinct zones from the centre of the fusion zone to the base region: at the centre of the fusion zone, cellular dendrites are present; near the fusion line in the fusion region, a chill zone and parallel dendrite arms are found; and an evident heat-affected zone is observed between the fusion line and the parent material. The maximum hoop test and T-pull test tensile strength of the T-joint is 89.6% and 69.8% of base metal. Microstructure observations find that the cracks propagate along the HAZ of the weld and move along the curve of the fusion line. The whole weld exhibits a mixed-rupture characteristic of quasi-cleavage and dimples. Copyright ©2010 by the International Astronautical Federation. All rights reserved.