Numerical simulation and optimization of compact latent heat exchanger with micro-channel plate in shape-stabilized composite phase change material
Weiguan Zhou,Yangjing He,Qing Xu,Changjun Wang,Ziye Ling,Zhengguo Zhang,Xiaoming Fang
DOI: https://doi.org/10.1016/j.applthermaleng.2024.122740
IF: 6.4
2024-02-29
Applied Thermal Engineering
Abstract:To enable the rapid provision of domestic hot water, this study presents the independent design of a plate heat exchanger featuring a large heat exchange area and a compact structure. Utilizing a sandwich structure, the thermal storage unit integrates two shaped composite phase change materials (CPCM), namely sodium acetate trihydrate (SAT)/expanded graphite (EG) blocks of identical thickness — in conjunction with a micro-channel heat exchange plate. Multiple thermal storage units are stacked to create the heat exchanger. Experimental validation of the heat transfer performance of this thermal energy storage heat exchanger is conducted, accompanied by the establishment of a heat transfer model elucidating the interaction between the phase change material (PCM) and the fluid. The investigation explores the impact of varying thicknesses of shape-stabilized CPCM, thermo-physical parameters of CPCM, and flow rates on enhancing the thermal efficiency of the thermal energy storage heat exchanger. Results indicate a competitive relationship between the phase change enthalpy and thermal conductivity of CPCM under constant density. Increasing the mass fraction of SAT effectively boosts its heat storage density. However, this improvement is counterbalanced by a reduction in CPCM's thermal conductivity, resulting in diminished heat transfer rates within the material and reduced efficiency in transferring heat between the material and the fluid. Optimal performance is achieved when the mass fraction of sodium acetate trihydrate is 80 wt% and the CPCM thickness is 20 mm. At these parameters, the thermal energy storage heat exchanger exhibits the highest heat transfer efficiency. Furthermore, the heat exchanger is capable of producing 197.86 kg of hot water in 1365 s at an inlet flow rate of 300 L/h, achieving an impressive discharging efficiency of 82.73 %. These findings underscore the feasibility of employing the mini-channel plate thermal energy storage heat exchanger for the rapid preparation of domestic hot water.
energy & fuels,engineering, mechanical,thermodynamics,mechanics