Abstract:Selective catalytic reduction (SCR) systems are distributed systems with strong time-varying parameter characteristics such that an accurate model for it is difficult to establish. Its control task simultaneously achieving high NOx conversion efficiency and low NH3 slip is a typical multi-objective and multi-constraint problem, which is suitable to be solved in the framework of the model predictive control (MPC). However, how to find a data-driven identification method based on the dynamic characteristics of an SCR system and a corresponding MPC method for satisfying its emission requirements remain a formidable challenge. The sufficient identification for the traditional identification method with fixed subspace model requires an excessively high order subspace matrix, such that a degradation in real-time performance is caused and the generality of the method under non-identification conditions is limited. In this paper, utilizing the transient data of the SCR system under the WHTC cycle, a novel identification method for some lower order subspace matrices excited by the segmented data referring to the dynamic of the ammonia coverage ratio is established. A corresponding predictive controller with the switched subspace matrices according to working conditions is designed in order to further improve its real-time performance, generality and robustness. The simulation results show that under the identification condition the proposed predictive controller compared to the traditional method can improve the emissions of NOx and NH3, that under the non-identification condition the proposed predictive controller can also improve the emissions and its optimization effects have better robustness to uncertainties of the transient cycle, and that the proposed predictive controller saves an significant computation time.

Subspace identification using the saturation measurement in data-driven control systems

An Improved Model Predictive Control for Uncertain Systems with Input Saturation.

Sampled‐data MPC for LPV Systems with Input Saturation

Subspace based direct closed-loop identification via output over-sampling scheme

A New Subspace Identification Approach Based on Principal Component Analysis and Noise Estimation

MPC Closed-Loop Identification Without Excitation

Subspace Model Identification for Industrial Processes

Performance Limits Analysis of Linear Predictive Control Systems with Input Saturation

Distributed Model Predictive Control with Saturated Inputs by A Saturation-Dependent Lyapunov Function

Adaptive Predictive Control: A Data-Driven Closed-Loop Subspace Identification Approach

Data-Driven Event-Triggered Adaptive Dynamic Programming Control for Nonlinear Systems with Input Saturation.

Identification of Nonlinear Systems with Rate Saturation.

Data-driven control of input saturated systems: a LMI-based approach

Robust Adaptive Fuzzy Control of Nonlinear Systems with Input Saturation Based on DSC and K-filter Techniques.

Data-Driven Predictive Control With Switched Subspace Matrices for an SCR System

Dynamic Output-Feedback Control for Sampled-Data System with Saturation Constraint Via Discontinuous Lyapunov Functional Approach

Estimating the Domain of Attraction of Discrete-Time Linear System with Nested Saturation

Distributed Model Predictive Control for Polytopic Uncertain Systems Subject to Actuator Saturation

Min-Max Mpc for Lpv Systems Subject to Actuator Saturation by A Saturation-Dependent Lyapunov Function

Anti-Saturation Extended State Observer for Speed Predictive Control of Servo System

Co-operative control of multi-input single-output processes: on-line strategy for releasing input saturation