Abstract:Clamping bushing structure is an internode connection mechanism designed for the standard section of tubular truss tower. In this paper, the clamping bushing structure of the connecting mechanism of super-large tower crane is taken as the research object, a three-dimensional model of clamping bushing structure is established and imported into ABAQUS, and its multi-body contact model is further constructed to study the contact and bearing relationship of the structure under multiple working conditions, and the accuracy of the calculation results of the model is verified by the experimental stress test under tensile working conditions. In addition, this study is based on the control variable method, and through the design of orthogonal test table, the influence degree of five variable parameters of clamping bushing on the bearing capacity of the structure is investigated. Finally, through the range analysis, the optimal horizontal combination of variables and parameters of clamping bushing structure is obtained, and the optimal matching relationship between the shape of the tower connecting mechanism and the bearing capacity is obtained. The results show that, compared with the original model, the stress concentration at the most dangerous section of the optimized joint and the bushing is obviously alleviated, in which the stress peaks of the upper and lower joints are kept below 500 MPa, and the stress peaks of the bushing groove are also reduced to between 573 and 722 MPa. Moreover, the designed and optimized lower joint can reduce the maximum equivalent plastic strain of the joint root circumference by 56.05% under the original maximum tensile condition, and the overall distribution trend of equivalent plastic strain is more uniform, and a more reliable structural design is obtained, which plays an important guiding role in the design, optimization and analysis of the connecting mechanism of the tower body of large tower crane.

Study on dynamic optimum design of tower crane structure

Dynamic Sensitivity Analysis of Complex Structure Based on FEM

Mechanical Behavior Analysis of Key Nodes for Extra-highTransmission Tower Foundations

The Finite Element Analysis for Tower Crane's Whole Structure

Size Optimization Design of Members for Shear Wall High-Rise Buildings

Optimal Design and Analysis of Deployable Antenna Truss Structure Based on Dynamic Characteristics Restraints

Strengthening Analysis and Engineering Application of High Towers by Using Diaphragm Bracings

Finite element analysis of complete structure of tower cranes

Strength Analysis and Optimal Design for Main Girder of Double-Trolley Overhead Traveling Crane Using Finite Element Method

Research on Multidisciplinary Optimization Design of Bridge Crane

Optimal Design of Crossbeam Stiffness Factor in Bridge Towers Using a Reliability-Based Approach

Dynamic analysis and optimization of a wind turbine tower subject to wind and earthquake loads

AN OPTIMAL SCHEME FOR HOISTING LARGE-SCALE SLENDER REINFORCED CONCRETE COLUMNS

Overhead crane bridge structure design optimization based on safety assessment

Automatic structural optimization design using sensitivity-based method

Robust Optimization of Structural Dynamic Characteristics Based on Adaptive Kriging Model and Cnsga

Optimization Design of Transmission Tower Based on Intelligent Selection

Research on Optimization of Column Structure Design for Dynamic Performance of Machine Tool

Optimization Design Method for A Hoisting Tooling

Dynamics Modification and It's Application to Construction of Container Cranes

Stress and strain analysis and parameter optimization of pipe truss tower connection of super-large tower crane based on FEM