Abstract:Objective. Due to the limited operating space in the magnetic resonance (MR) environment, there is coupled motion in the insertion mechanism, which not only reduces the flexibility of the robot but also challenges the insertion path planning. Meanwhile, the path planning is also restricted by the bending rule of the flexible needle, thus the bending model of the needle is also essentially built. Approach. This paper proposes a path planner for the flexible needle based on both the coupled motion kinematics of the insertion robot and the bending model of the flexible needle. A kinematic analysis for the coupled motion of insertion robot is performed. And the bending model of flexible needle is established based on the needle-tissue interactions. The position and posture of the needle insertion at the entry point are obtained by the calculation of the target position and the analysis of the bending model. And the rotation or translation coordinates of each robot joint are calculated by the inverse kinematics of the insertion robot. Then the path planning based on the coupled kinematics and the bending model is realized. Main results. The insertion experiments were performed for each target of G1 and G2. The root mean square errors were 0.83 mm and 0.74 mm, and the maximum errors were 1.1 mm and 0.9 mm for G1 and G2, respectively. The experimental results show that the effectiveness and accuracy of the path planning can meet the requirements for a general minimally invasive surgery, so the proposed path planning algorithm is feasible. Significance. This study provides a new solution for the path planning of insertion robots for the minimally invasive surgery. This method can meet the insertion mechanism working within the limited operating space in the MR environment and has a high application value in future clinical medicine.

Optimal path planning for inserting a steerable needle into tissue

Dynamic path planning for inserting a steerable needle into soft tissue

Dynamic Path Planning for Bevel-Tip Flexible Needle Insertion into Soft Tissue Based on a Real-Time Finite Element Model

Curve Fitting-Based Dynamic Path Planning and Tracking Control for Flexible Needle Insertion

An Evolutionary-Optimized Surgical Path Planner for a Programmable Bevel-Tip Needle

Modeling of path planning and needle steering with path tracking in anatomical soft tissues for minimally invasive surgery

Ablation needle insertion path planning method and system

Design and Kinematic Modeling of a Novel Steerable Needle for Image-Guided Insertion

2D Path Planning of Bevel Tip Flexible Needle in Soft Tissue

Toward certifiable optimal motion planning for medical steerable needles

A Novel Model-Based Path Planning Method for Robot-Assisted Flexible Needle Insertion

Path planning for flexible needle based on both insertion mechanism kinematics and needle bending model

Closed-loop Control of Bevel-Tip Needles Based on Path Planning

Needle Deflection Modeling and Preoperative Trajectory Planning During Insertion into Multilayered Tissues

Motion planning for flexible needle in multilayer tissue environment with obstacles

Needle path planning and steering in a three-dimensional non-static environment using two-dimensional ultrasound images

2D Path Optimization for Flexible Needle Based on Combination of Multiform Paths

A survey on puncture models and path planning algorithms of bevel-tipped flexible needles

Needle-tissue interactive mechanism and steering control in image-guided robot-assisted minimally invasive surgery: a review

Biopsy Needle Puncture Path Planning Method Based on 3D Ultrasound Images