Production of phenolic chemicals via liquefaction of alkali lignin from bagasse

Sui Xin-jin,Wu Shu-bin

DOI: https://doi.org/10.3969/j.issn.1000-565X.2011.01.001

2011-01-01

Abstract:In order to increase the utilization value of alkali lignin from bagasse, aluminium silicate was chosen as the catalyst to produce phenolic chemicals from the lignin via a liquefaction process. The reaction conditions including aluminium silicate dosage, heating time, heating temperature and liquid-solid (glycerol-bagasse alkali lignin) ratio were then optimized as follows: an aluminium silicate dosage of 4% (based on the dry bagasse alkali lignin), a heating duration of 1h, a heating temperature of 270°C and a liquid-solid ratio of 6 mL/g (based on the dry bagasse alkali lignin). In these conditions, phenolic chemicals mainly containing 2, 6-dimethoxy-phenol, 2-methoxy-phenol and phenol were produced, with a total yield of 54.10%. Moreover, the structures of functional groups of the alkali lignin before and after the liquefaction were analyzed by means of FT-IR and 1H NMR. The results show that, when the heating temperature reaches 270°C, the propane units of the phenylpropane separate from benzene units in the presence of aluminium silicate, and the β-ether lingkages (β-O-4) break due to high temperature and the existence of acid. At the same time, few α-ether lingkages (α-O-4) break to produce phenols following the separation of propane units.