Abstract:The conventional optimal pitch angle below the rated wind speed is not necessarily optimal under constant speed region of the turbine.Tracking maximum power equals to tracking maximum aerodynamic torque in the constant speed region. In order to improve power production, the qualitative relationship between tangential/thrust force coefficient and pitch angle under two constant speed regions were analyzed.The results show that during the constant lowest speed region, the tangential force coefficient can be improved by reasonable pitch action with positive direction so as to improve the power production, with the thrust load decrease; During the constant highest speed region, the tangential force coefficient can be improved by reasonable pitch action with reverse direction so as to improve the power production, but would increase the thrust load; There is a corresponding optimal pitch angle for a specific wind speed in two constant speed regions, and the optimal pitch angle changes with wind speed with monotonicity. As the optimal pitch angle is difficult to quantify directly, a reasonable expression of the optimal pitch angle was deduced according to the qualitative analysis, and the method to identify the parameters in the expression was also given. Finally, the study was verified by a commercial turbine model on professional software GH Bladed, from both steady aspects and dynamic aspects. The simulation results fits the analysis quite well, so as to offer a better guide for improving power production.

Analysis of Wind Turbine Blade Torque in Pitch Control

RESEARCH ON THE LOAD CONTROL OF WIND TURBINES BASED ON INDIVIDUAL PITCH TECHNOLOGY

The Effect of Wind Shear and Pitch Control Delaying on Wind Turbine Blade Loading

Wind Turbine Aerodynamics and Loads Control in Wind Shear Flow

Torque Smoothing Control of Wind Turbine Generator System Using Individual Pitch Control

Load Control of Wind Turbine Based on Model-free Adaptive Controller

Aerodynamic load analysis and power control for large wind turbine

THE RESEARCH ON LARGE SCALE WIND TURBINE INDIVIDUAL BLADE PITCH CONTROL SYSTEM

Hydraulic Variable Pitch Control and Aerodynamic Load Analysis for Wind Turbine Blades

Torque Control and Pitch Control Strategy in Vscf Wind Turbine above Rated Wind Speed

Load analysis and power control of large wind turbine based on wind shear and tower shadow

Loading System and Control Strategy for Simulating Wind Turbine Loads

STUDY ON BLADE PITCHING SYSTEM FOR HORIZONTAL AXIS TIDAL CURRENT TURBINE

3D Multiscale Dynamic Analysis of Offshore Wind Turbine Blade under Fully Coupled Loads

Blade-Pitch Control for Wind Turbine Load Reductions

Design, Modeling and Implementation of a Novel Pitch Angle Control System for Wind Turbine

THE STRUCTURAL ANALYSIS METHOD OF WIND TURBINE BLADE BASED ON MECHANICS OF COMPOSITE MATERIALS

Advanced Pitch Control for Improving Power Production for Large Scale Wind Energy Conversion System under Constant Speed Region

Torque-pitch Coordinated Control for Improving the Power Production of Wind Energy Conversion System

Optimization of Blade Pitch in H-rotor Vertical Axis Wind Turbines Through Computational Fluid Dynamics Simulations

Torque Performance of Horizontal Axis Wind Turbines and Its Impacts of Blade Tip Losses