Abstract:In a recent publication (Yang et al., 2009. Monte Carlo simulation of complex cohesive fracture in random heterogeneous quasi-brittle materials. Int. J. Solids Struct. 46 (17) 3222–3234), we developed a finite element method capable of modelling complex two-dimensional (2D) crack propagation in quasi-brittle materials considering random heterogeneous fracture properties. The present study extends the method to model three-dimensional (3D) problems. First, 3D cohesive elements are inserted into the initial mesh of solid elements to model potential crack surfaces by a specially designed, flexible and efficient algorithm and corresponding computer program. The softening constitutive laws of the cohesive elements are modelled by spatially-varying 3D Weibull random fields. Monte Carlo simulations are then carried out to obtain statistical information of structural load-carrying capacity. A concrete cube under uniaxial tension was analysed as an example. It was found that as the 2D heterogeneous model, the 3D model predicted realistic, complicated fracture processes and load-carrying capacity of little mesh-dependence. Increasing heterogeneity in terms of the variance in the tensile strength random fields resulted in lower mean and higher standard deviation of peak loads. Due to constraint effects and larger areas of unsmooth, non-planar fracture surfaces, 3D modelling resulted in higher mean and lower standard deviation of peak loads than 2D modelling.

Fracture behavior of three-dimensional braided composites

A Mechanical Model of 3d Braided Composites with Internal Transverse Crack

A damage model for 3D braided composites with transverse cracking

A Novel Modeling Method to Study Compressive Behaviors of 3D Braided Composites Considering Effects of Fiber Breakage and Waviness Defects

A Finite Element Model for Failure Analysis of 3D Braided Composites

A novel numerical simulation method for predicting compressive properties of 3D multiaxial braided composites considering various defects

The effect of interface properties on the mechanical behaviour of 3D braided composites under unidirectional tensile loading

Study on in-plane compression properties and numerical modeling of three dimensional five-directional braided composites

Investigation on the Compressive Properties of the Three Dimensional Four-Directional Braided Composites

Investigation of parameterized braiding parameters and loading directions on compressive behavior and failure mechanism of 3D four-directional braided composites

Monte Carlo Simulation of Complex Cohesive Fracture in Random Heterogeneous Quasi-Brittle Materials: A 3D Study

The effect of interface properties on the mechanical behavior of 3D braided composites under unidirectional tensile loading

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

Numerical investigation of tensile behavior of three-dimensional six-directional braided composites

3D Finite Element Simulation of Complex Static and Dynamic Fracture in Quasi-Brittle Materials

Meso-Scale Damage Simulation of 3D Braided Composites under Quasi-Static Axial Tension

Predicting the Nonlinear Response and Failure of 3d Braided Composites

Mesoscale progressive damage and strength analysis of three-dimensional braided composites under tension

A multi-scale finite element method for failure analysis of three-dimensional braided composite structures

Experimental and numerical study of in-plane compressive properties and failure of 3D six-directional braided composites with large braiding angle

Compressive Experimental Investigation of 3D 4-Directional Braided Composites Board on Mesoscopic Failure Mechanism