Abstract:Traditional topography measurements for rough objects are usually based on point-contact scan. The way of point-contact scan is usually not a high-efficient way to obtain data. Hence, in practice, only a few traces are measured which result in limited data. In order to obtain topography of sufficient amount of data, the demand for rapid noncontact measurement is increasing. In this work, we propose a dual wavelength digital holography (DWDH) measurement system with a synthetic wavelength of 51µm. We apply the DWDH system for 3D measurement of rougher surfaces and objects with a complex and small-size structure to further explore the measurement capability of DWDH. The proposed system enables the possibility to obtain the entire topography with millions of points of a rough surface in a single noncontact measurement. Firstly, we measure a cylinder workpiece of 10mm radius with a large roughness of Ra = 2.6µm which causes severe noise to measurement. The measured radius is 9.8099mm, which indicates a good accuracy. The mean standard deviation of all measured points is 1.08µm, which indicates a good repeatability and good anti-noise capability of the DWDH system. Then the proposed system is applied to measure the tooth surface of a gear of 1mm module and 18 teeth which has a complex and small-size structure. The measured surface shape agrees with the ideal gear tooth surface shape well. And the mean standard deviation of all measured points is 0.94µm, which also verifies its good repeatability. Our work presents the possibility of broader DWDH applications in industrial topography measurements.

Three-dimensional imaging for micro-optical component by using dual-wavelength digital holography

Low Noisy Dual Wavelength Digital Holography and Application in the Ultra-precision Machining Surface Measurement

Three-dimensional Imaging of Microstructures by an Improved Compact Digital Holographic Microscope (ICDHM) with Dual Wavelength

Dual-wavelength Common-Path Digital Holographic Microscopy for Quantitative Phase Imaging Based on Lateral Shearing Interferometry.

Depth Range Extended Digital Holography for Precise 3d Profile Imaging Via Dual Frequency Interval Sweeping

Multi-Angle Digital Holographic Profilometry for Precision Measurements

Novel Method of Digital Holographic Profilometry

Study on Quantitative Phase Imaging by Dual-Wavelength Digital Holography Microscopy

Three-Dimensional Surface Contouring of Reflecting Micro-Object by Digital Holography with Short-Coherence Light Source

Three-dimensional Surface Measurement by Amplified Off-Axis Digital Holography

Axial Displacement Measurement with High Resolution of Particle Movement Based on Compound Digital Holographic Microscopy

A Commercialized Digital Holographic Microscope with Complete Software Supporting

Compact Digital Holoscope with Dual Wavelength

3D Measurement of Rough Objects Based on Dual Wavelength Digital Holography

Development of Two User-Friendly Commercial Digital Holographic Microscopes and Applications

Dual-wavelength slightly off-axis digital holographic microscopy.

Shape Measurement of Micro-Objects Using A Common-Path Digital Holographic Microscopy (cdhm) with Dual Wavelength

Multi-Wavelength Holographic Profilometry

The Microstructure Measurement of Surface Defects of Optical Component Based on Digital Image-Plane Holographic Microscopy

Quasicommon-path Digital Holographic Microscopy with Phase Aberration Compensation Based on a Long-Working Distance Objective

An auto-focusing reflection-type lens-less digital holographic microscope