The Effect of The Number of Sensor Coils on Sensitivity in Electromagnetic Tomography.
Siqi Xu,Qian Zhao,Liu Li,Nan Li,Wenjun Tan
DOI: https://doi.org/10.1145/3451421.3451470
2020-01-01
Abstract:Electromagnetic tomography (EMT) is a process tomography based on the principle of electromagnetic induction. It has the advantages of non-intrusive, non-contact and low harm. In the process of image reconstruction, the sensitivity matrix reflects the influence of tiny disturbance on the measured value, which is an important index of image quality. Base on the traditional "O" sensor array structure in this article, Comsol Multiphysics finite element simulation software is used to divide the measured field into several tiny elements. A simulated perturbation method is used to investigate the effect of the number of EMT sensors' midline coils on sensitivity. The sensitivity matrix of sensor arrays with 4 coils ,8 coils ,12 coils ,16 coils and 20 coils is compared by using the method of separation variables. The sensitivity matrix of different coils is imaged by Matlab software. Through comparative analysis, it is concluded that the sensitivity band shape of the coil in the same position is same in different models. All of them are distributed along the arc type between the excitation and detection coils, which presents the middle strong and gradually weakens to the outside. With the increase of the number of coils, the sensitivity band is widened, but the sensitivity value of the central part is slightly weakened. According to this characteristic, it lays a foundation for the practical application of EMT technology and image reconstruction.