Abstract:In the present work, the collapse regimes of the cavitation occurring on the submerged vehicles navigating with deceleration were numerically investigated. A homogeneous equilibrium cavitation model was combined with the pressure–velocity–density coupling algorithm to simulate the cavitating flows. The cavity is induced to collapse by the deceleration after fluctuation, and the first collapse releasing most of the energy is followed by a series of secondary ones. The collapse process can be classified into two types: periodic oscillation and damped oscillation. In each type the evolution of the total mass of vapor in cavity is found to have strict correlation with the pressure oscillation in the far field. The two types are different in the intensity and the bandwidth of the pressure peaks. By defining the equivalent radius of cavity, we introduce the specific kinetic energy of collapse and demonstrate that its change-rate is in good agreement with the pressure disturbance. It is also found that the drag presents corresponding oscillations. Through comparative analysis on the velocity field and the stress distribution along the body, it indicates that the collapse can produce extremely high pressure instantaneously. We numerically investigated the influence of the angle of attack on the collapse regime. The result shows that when the vehicle decelerates, an asymmetric-focusing effect of the pressure induced by collapse occurs on its pressure side. We analytically proved such an asymmetric-focusing effect using the potential flow theory. The mathematical model and method we proposed show capability in reflecting the evolution of the pressure difference between both sides of the vehicle.

Numerical Analysis on the Characteristics of Side Cavitation Around Submerged Vehicle With Large Attack Angle

Numerical study of the cavitating flows over underwater vehicle with large angle of attack

Numerical Study of Violent Impact Flow Using a CIP-Based Model

Numerical Simulation of Water Entry of Two-Dimensional Structures with Complex Geometry Using a CIP-based Model

Numerical analysis of cavitation and impact load characteristics of supercavitating vehicle entering water at high speed

Numerical Method for Three-dimensional Cavitation Flows at Small Cavitation Numbers

Numerical Investigation on the Cavitation Collapse Regime Around the Submerged Vehicles Navigating with Deceleration

Application of Non-Linear Turbulence Models on the Numerical Simulation of Cavitating Flows

Numerical Simulation of Cavitation Flow under High Pressure and Temperature

Numerical Simulation Research of the Sheet Cavity for Underwater Vehicle

Analysis of Ventilated Cavitation Around A Cylinder Vehicle with Nature Cavitation Using A New Simulation Method

APPLICATION OF QUADRATIC AND CUBIC TURBULENCE MODELS ON CAVITATING FLOWS AROUND SUBMERGED OBJECTS

Numerical Simulation on the Cavitation Flow of High Speed Oblique Water Entry of Revolution Body

NUMERICAL INVESTIGATION OF THE VENTILATED CAVITATING FLOW AROUND AN UNDER-WATER VEHICLE BASED ON A THREE-COMPONENT CAVITATION MODEL

Numerical analysis of cavitating flow around a hemisphere-cylinder body

Numerical Simulation of Flunctuating Characteristics of Cavitating Flow Around Axisymmetric Body at Angle of Attack

Numerical Study of Cavitation on Hydrofoils

A Numerical Analysis of the Influence of the Cavitator's Deflection Angle on Flow Features for a Free Moving Supercavitated Vehicle

Modelling and Computation of Unsteady Turbulent Cavitation Flows

Numerical Investigation of the Angle of Attack Effect on Cloud Cavitation Flow around a Clark-Y Hydrofoil

Numerical Simulation on Hydrodynamic Characteristics of Submarine Missile in the Vertical Launch Process