Abstract:Set-associative instruction caches achieve low miss rates at the expense of significant energy dissipation. Previous energy-efficient approaches usually suffer from performance degradation and redundant extension bits. In this paper, we propose a Way History Oriented Low Energy Instruction Cache (WHOLE-Cache) design for single issue and in-order execution processors. The WHOLE-Cache design not only achieves a significant portion of energy reduction by effectively reducing dynamic energy dissipation of set-associative instruction cache, but also leads to no additional cycle penalties. Tag comparison results are stored into either the Branch Target Buffer (BTB) or the Instruction Cache (I-Cache) to avoid tag checks and unnecessary way activation for subsequent accesses to visited cache lines. The extended BTB uses way history bits for branch instructions, while the I-Cache extension bits are used in case of fetching consecutive instructions resided in different cache lines. A valid flag is associated with each stored tag comparison result to indicate whether the instruction to be fetched is resided in the recorded location. A simple invalidation scheme is implemented in the cache miss replacement operation. Whenever a cache line is replaced, the pointers to it, which reside in the BTB or other I-cache lines, will be invalidated accordingly. We model the WHOLE-Cache design in Verilog. By deriving basic parameters from TSMC 65nm technology, we use Wattch simulator to evaluate the performance and energy reduction of the WHOLE-Cache in the instruction fetch stage. We use SPEC2000 and Mediabench as benchmarks. It is observed that compared with a conventional 4-way set-associative I-Cache, the energy consumption of the WHOLE-Cache is reduced by 65% without any performance penalty.

Linking history based low-power instruction cache

Low power instruction cache based on adjacent line linking access

Low-power consumption strategy for instruction cache based on way-access track

Pre-Visiting Tag and Keeping Way History to Reduce Power in Instruction Cache

Study on the Low Power Cache Design Technique

Reducing Power with an L0 Instruction Cache Using History-Based Prediction

Exploiting Base Address Locality in Low Power Data Cache Design

A Low-Leakage Pipelined Instruction Cache Design

Reconfiguration Algorithm of Low-Power Reconfigurable Cache

THE DESIGN OF A LOW POWER DYNAMICALLY RECONFIGURABLE CACHE

Cache Miss Reduction Through Hardware-Assisted Loop Optimization

A review on the L0 instruction cache

WHOLE: A Low Energy I-Cache with Separate Way History

Loop Based Trace Way Prediction for Instruction Cache

A Design of Online Configurable and Low Power Cache for Embedded Processor

Instruction Cache Power-Performance Optimization Via Run-Time Prediction

A Way Memoization Technique for Reducing Power Consumption of Caches in Application Specific Integrated Processors

The dynamic relocation cache and its energy consumption model for low power processor

An Energy-Efficient Combining Way Selective Technique for the Instruction Cache in Superscalar Microprocessors

Way Selecting Cache Architecture for Low Power Consumption

An On-Demand Mechanism for Data Cache Leakage Power Management