Study on Half-nitrosofication-ANAMMOX Process for Treatment of Reject Water

吕鑑,孟凡能,张树军,周军,甘一萍,王毅,张春苹

2011-01-01

Abstract:Combination of half-nitrification process and anaerobic ammonium oxidation （ANAMMOX） process for the treatment of rejected water with high ammonium and low ρ （ C）/ρ （N） are evaluated. The experimental results indicated that the nitrition is realized in 29 d at 9 - 20 ℃ , average DO of 5.4 mg/L, SRT of about 30 d and influent ammonia loading rate of 0.64 kg/（ m^3·d） ; The nitrition with 75% nitrite accumulation efficiency maintains between 30 -96 d when average FA concentration is more than 4 mg/L in A/O reactor; Furthermore, the half-nitrification is obtained because of effluent ammonia and nitrite ratio of 1： 1.32; Under the condition of （30 ±0. 2） ℃ , influent pH of 7.3 to 7.9, making rejected water of nitrition as influent, and initial ammonia and nitration load of 0.07 kg/（ m^3·d） and 0. 10 kg/（m^3·d） respectively, simultaneous removal of ammonia and nitrite take place in 24 d in UASB reactor inoculating with mixed sludge consisted of aerobic granular sludge, anaerobic granular sludge, oxidation ditch sludge and nitrition sludge, and the total nitrogen removal reaches up to 1.03 kg/（m^3·d） was reached in 186 d. After half-nitrosofication operated steadily and ANAMMOX starts up successfully, the total nitrogen removal reaches 70% when they are combined for 105 d.