Abstract:A submerged membrane bioreactor (MBR) with a working volume of 1.4 L and a hollow fiber microfiltration membrane was used to treat a contaminated raw water supply at a short hydraulic retention time (HRT) of approximately 1 h. Filtration flux tests were conducted regularly on the membrane to determine various fouling resistances, and confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM) were employed to characterize the biofouling development and sludge cake formation on the membrane. The experimental results demonstrate that the MBR is highly effective in drinking water treatment for the removal of organic pollutants, ammonia, and UV absorbance. During the MBR operation, the fouling materials were not uniformly distributed on the entire surface of all of the membrane fibers. The membrane was covered partially by a static sludge cake that could not be removed by the shear force of aeration, and partially by a thin sludge film that was frequently washed away by aeration turbulence. The filtration resistance coefficients were 308.4 x 10(11) m(-1) on average for the sludge cake, 32.5 x 10(11) m(-1) on average for the dynamic sludge film, and increased from 10.5 x 10(11) to 59.7 x 10(11) m(-1) for the membrane pore fouling after 10 weeks of MBR operation at a filtration flux of 0.5 m3/m2 x d. Polysaccharides and other biopolymers were found to accumulate on the membrane, and hence decreased membrane permeability. More important, the adsorption of biopolymers on the membrane modified its surface property and led to easier biomass attachment and tighter sludge cake deposition, which resulted in a progressive sludge cake growth and serious membrane fouling. The sludge cake coverage on the membrane can be minimized by the separation, with adequate space, of the membrane filters, to which sufficient aeration turbulence can then be applied.

Cake Fouling Mechanism and Analysis of Synthetic Coke Wastewater Treatment by Membrane Bioreactor

A Review of Membrane Fouling in MBRs: Characteristics and Role of Sludge Cake Formed on Membrane Surfaces

STUDY OF THE OPERATION AND CAKE CHARACTERISTICS IN A DYNAMIC MEMBRANE BIOREACTOR

Characterization of Cake Layer in Submerged Membrane Bioreactor

New Insights into Comparison Between Synthetic and Practical Municipal Wastewater in Cake Layer Characteristic Analysis of Membrane Bioreactor.

Filtration Behaviors and Biocake Formation Mechanism of Mesh Filters Used in Membrane Bioreactors

Performance of a dynamic membrane bioreactor employed for treating domestic wastewater

Fouling characteristics in membrane coupled anaerobic bioreactor

Comprehensively Understanding Fouling Properties of Cake and Bulk Sludge in an Anammox Membrane Bioreactor: Focusing on the Composition, Interfacial Thermodynamics and Microbial Community

Insights into Membrane Fouling of Submerged Membrane Bioreactors by Characterizing Different Fouling Layers Formed on Membrane Surfaces

Cake Layer Morphology in Microfiltration of Activated Sludge Wastewater Based on Fractal Analysis

Spatial variability of cake layer in membrane fouling of full-scale MBR: New insights and implications

Membrane Fouling in a Submerged Membrane Bioreactor (MBR) under Sub-Critical Flux Operation : Membrane Foulant and Gel Layer Characterization

Membrane Fouling in a Membrane Bioreactor (MBR): Sludge Cake Formation and Fouling Characteristics.

Microbial behaviors involved in cake fouling in membrane bioreactors under different solids retention times.

Sludge rheological and physiological characteristics in a pilot-scale submerged membrane bioreactor

Inorganic Characteristics of Cake Layer in A/O MBR for Anaerobically Digested Leachate from Municipal Solid Waste Incineration Plant with MAP Pretreatment

Study on the Cake Layer Permeation in Microfiltration of Sludge Suspension Based on Fractal Theory

Dynamic membrane bioreactor for wastewater treatment: Operation, critical flux, and dynamic membrane structure

Optimization of MBR Hydrodynamics for Cake Layer Fouling Control Through CFD Simulation and RSM Design.

Electroactive biocake layer-driven advanced removal of dissolved organic matter at membrane interface of anaerobic electrochemical membrane bioreactor