Abstract:Based on the intramolecular energy transfer, relative gains of 10.5 and 8.5 dB cm−1 at 1535 and 1550 nm respectively are demonstrated in ErIII coordination polymer [Er(DBTTA)3(FDPO)]n‐doped waveguides under excitations of light‐emitting diode instead of laser pumping. This study is expected to achieve the application of polymer waveguide amplifiers in planar photonic integration and facilitate low‐cost packaging of the waveguide and pump sources. 9,9‐bis (diphenylphosphorylphenyl) fluorene (FDPO) and dibenzotetrathienoacene (DBTTA), are synthesized as the neutral and anionic ligands, respectively, to prepare the ErIII coordination polymer [Er(DBTTA)3(FDPO)]n. Based on the intramolecular energy transfer, optical gains at 1.5 μm are demonstrated in [Er(DBTTA)3(FDPO)]n‐doped polymer waveguides under excitations of low‐power light‐emitting diodes (LEDs) instead of laser pumping. A ligand‐sensitization scheme between organic ligands and Er3+ ions under an excitation of an ultraviolet (UV) LED is established. Relative gains of 10.5 and 8.5 dB cm−1 are achieved at 1.53 and 1.55 μm, respectively, on a 1‐cm‐long SU‐8 channel waveguide with a cross‐section of 2 × 3 μm2 and a 1.5‐μm‐thick [Er(DBTTA)3(FDPO)]n‐doped polymethylmethacrylate (PMMA) as upper cladding. The ErIII coordination polymer [Er(DBTTA)3(FDPO)]n can be conveniently integrated with various low‐loss inorganic waveguides to compensate for optical losses in the C‐band window. Moreover, by relying on the intramolecular energy transfer and UV LED top‐pumping technology, it is easy to achieve coupling packaging of erbium‐doped waveguide amplifiers (EDWAs) with pump sources in planar photonic integrated chips, effectively reducing the commercial costs.

A study of erbium-ytterbium-codoped polymer waveguide amplifier

Study of polymer optical waveguide amplifier at 1.55 μm wavelength

Demonstration of Optical Gain at 1550 Nm in Erbium-Ytterbium Co-Doped Polymer Waveguide Amplifier

High-gain Polymer Optical Waveguide Amplifiers Based on Core-Shell NaYF4/NaLuF4: Yb3+, Er3+ NPs-PMMA Covalent-Linking Nanocomposites.

Erbium-Ytterbium Codoped Waveguide Amplifier Fabricated with Solution-Processable Complex

A strategy for preparing broadband polymer based optical waveguide amplifiers: doping low crystal field symmetric nanocrystals in polymer matrix as gain media

All-polymer Waveguide Amplifiers Based on Er~(3+)-Yb~(3+) Co-Doped Soluble Complex

Optical Amplification at 1.5 μm in ErIII Coordination Polymer‐Doped Waveguides Based on Intramolecular Energy Transfer

Influencing Factors on Erbium-Doped Polymer Waveguide Amplifier

Preparation and Test on Er~(3+) Doped Polymer Optical Waveguide Amplifier

Erbium-ytterbium co-doped aluminium oxide waveguide amplifiers fabricated by reactive co-sputtering and wet chemical etching

Polymer/silica Hybrid Waveguide Amplifier at 532 Nm Based on NaYF4:Er3+, Yb3+ Nanocrystals

Optical Gain at 1.55 Μm of Er(TMHD)3 Complex Doped Polymer Waveguides Based on the Intramolecular Energy Transfer Effect.

(S + C)-band Polymer Waveguide Amplifier Based on Tm3+ and Er3+ Layer-Doped Core-Shell Nanoparticles.

Sub-10 Nm BaYF5:Yb3+,Er3+ Core–shell Nanoparticles with Intense 1.53 Μm Fluorescence for Polymer-Based Waveguide Amplifiers

Achieving Multiwavelength Optical Amplification Based on Polymer Waveguides Doped with NaYF4:Er3+, Yb3+ Nanoparticles under Commercial and Convenient Led Pumping

Study on Er3+-Yb3+ co-doped La2O3–Al2O3 glasses for C-band optical waveguide amplifier with high luminous efficiency and low pump threshold

KMnF3:Yb3+,Er3+@KMnF3:Yb3+ active-core–active-shell nanoparticles with enhanced red up-conversion fluorescence for polymer-based waveguide amplifiers operating at 650 nm

Fabrication of Optical Waveguide Amplifiers Based on Bonding-Type NaYF4∶Er Nanoparticles-Polymer

Gain Characteristics of Polymer Waveguide Amplifiers Based on NaYF4:Yb3+, Er3+ Nanocrystals at 0.54 Μm Wavelength

Polymer-based S-band Waveguide Amplifier Using NaYF4:Yb,Tm-PMMA Nanocomposite As Gain Medium