An Electrically Large Metallic Cavity Antenna with Circular Polarization for Satellite Applications

Yang Zhao,Zhijun Zhang,Zhenghe Feng
DOI: https://doi.org/10.1109/lawp.2011.2178585
IF: 4.2
2011-01-01
IEEE Antennas and Wireless Propagation Letters
Abstract:An electrically large metallic cavity antenna with circular polarization (CP) is proposed in this letter. The aim is to increase the size of satellite antennas working in the Ku-band and other higher-frequency bands through low cost and easy fabrication. A brass C-band antenna prototype is designed, fabricated, and measured for concept verification. The overall dimensions of the antenna are 0.67λ 0 × 0.67λ 0 × 0.83λ 0 at the working frequency. The resonant mode of the proposed cavity antenna is excited by a coaxial feeding probe, and circular polarization is realized by an inserted perturbation screw. The measured impedance bandwidth for | S 11 | ≤ -10 dB and 3-dB axial-ratio bandwidth are 1.02 GHz (6.07-7.09 GHz) and 320 MHz (6.59-6.91 GHz), respectively. The measured gain is 8.5 dBic across the whole 3-dB axial-ratio bandwidth. The measured 3-dB axial-ratio beamwidths at the central frequency are 150 ° and 148 ° in the xoz - and the yoz -planes, respectively, which is wide enough to cover the >; 0-dBi gain beamwidths of 120 ° for practical engineering applications. The measured and the simulated results show good agreement.
What problem does this paper attempt to address?