Analysis on optimization of diamond-coated drawing dies by FEM simulation
Xiaojing Yang,Fanghong Sun,Zhiming Zhang,Hesheng Shen,Songshou Guo
DOI: https://doi.org/10.3969/j.issn.1006-852X.2008.04.002
2008-01-01
Abstract:In the tube and wire high velocity drawing area, the diamond-coated drawing die is becoming the next generation of drawing dies for its excellent properties, such as high hardness, good wear resistance, and low friction coefficient. In order to investigate the influence of parameters of diamond-coated drawing dies upon the drawing of copper wires, the nonlinear finite element analysis was used to simulate the whole copper wires drawing process. The distributions of the axial stress and radial stress on drawn wires and dies were analyzed. Then the orthogonal experiment was conducted to investigate the influence of parameters of diamond-coated drawing dies (the semi-angle of drawing dies α, the radius of transition arc R, the length of bearing part L) upon thé copper wires drawing process with different compressibility. The optima] parameters (for compressibility 13.7%, α =6°, R=4 mm,L=4.5 mm; for compressibility of 25.8%, α =7°, R = 3 mm, L = 4.5 mm ) of diamond-coated drawing dies were gained. Based on (he range analysis and variance analysis of the simulation results, the influence rules of experiment factors upon the axial residual stress of copper wires and the maximum equivalent stress of diamond-coated drawing dies were revealed. Compared with cemented carbide drawing dies, the results of application experiments showed that the working lifetime of optimal diamond-coaled drawing dies could be increased by a factor of 10. This is of great significance for the extensive application of diamond-coated drawing dies.