Abstract:In this study, a neural network approach is presented for the prediction and control of surface roughness in a computer numerically controlled (CNC) lathe. Experiments have been performed on the CNC lathe to obtain the data used for the training and testing of a neural network. The parameters used in the experiment were reduced to three cutting parameters which consisted of depth of cutting, cutting speed, and feed rate. Each of the other parameters such as tool nose radius, tool overhang, approach angle, workpiece length, workpiece diameter and workpiece material was taken as constant. A feed forward multi-layered neural network was developed and the network model was trained using the scaled conjugate gradient algorithm (SCGA), which is a type of back-propagation. The adaptive learning rate was used. Therefore, the learning rate was not selected before training and it was adjusted during training to minimize training time. The number of iterations was 8000 and no smoothing factor was used. Ra, Rz and Rmax were modeled and were evaluated individually. One hidden layer was used for all models while the numbers of neurons in the hidden layer of the Ra model were five and the numbers of neurons in the hidden layers of the Rz and Rmax models were ten. The results of the neural network approach were compared with actual values. In addition, inasmuch as the control of surface roughness is proposed, a control algorithm was developed in the present investigation. The desired surface roughness was entered into the control system as a reference value and the controller determined the cutting parameters for these surface roughness values. A new surface roughness value was determined by sending the cutting parameters to the observer (ANN block). The obtained surface roughness was fed back to the comparison unit and was compared with the reference value and the difference surface roughness was then sent to the controller. The iteration was continued until the difference was reduced to a certain value of surface roughness which could be permitted for machining accuracy. When the surface roughness reached the permitted value, these cutting parameters were sent to the CNC turning system as input values. In conclusion, both the surface roughness values corresponding to the cutting parameters and suitable cutting parameters for a certain surface roughness can be determined prior to a machining operation using the ANN and control algorithm.

Surface Roughness Prediction in Turning of Free Machining Steel 1215 by Artificial Neural Network

An Intelligent Prediction of Surface Roughness on Precision Grinding

Prediction of Surface Roughness Using Regression and ANN Models in High-Speed Finish Milling Operation

Surface roughness predictive modeling: neural networks versus regression

Neural network based prediction of surface roughness in high speed milling of metal matrix composites

Intelligent Prediction for Surface Roughness of Cnc Surface Grinding Machine Tool Based on Bayesian Network

Prediction of surface roughness in duplex stainless steel face milling using artificial neural network

Prediction and control of surface roughness in CNC lathe using artificial neural network

Study on Analytical Model of Surface Roughness Prediction in NC Machining

The development of an ANN surface roughness prediction system of multiple materials in CNC turning

Optimizing Cutting Conditions and Prediction of Surface Roughness in Face Milling of AZ61 Using Regression Analysis and Artificial Neural Network

Prediction and Control of Surface Roughness for the Milling of Al/SiC Metal Matrix Composites Based on Neural Networks

Predictive Quality Analytics of Surface Roughness in Turning Operation Using Polynomial and Artificial Neural Network Models

Prediction of surface roughness in CNC face milling using neural networks and Taguchi's design of experiments

Research on Prediction of Cutting Surface Roughness Based on Elman Neural Network

Predicting Surface Roughness of Dry Cut Grey Cast Iron Based on Cutting Parameters and Vibration Signals from Different Sensor Positions in CNC Turning

Surface Roughness Prediction Based on Cutting Parameters and Nose Radius in Precision Turning

Modeling and Prediction of Surface Roughness in Belt Polishing Based on Artificial Neural Network

A Physics-Informed Machine Learning Model for Surface Roughness Prediction in Milling Operations

RBF Neural Network Forecasting Model of Surface Roughness for NC Machining

Effect Analysis and ANN Prediction of Surface Roughness in End Milling AISI H13 Steel